Compaq AA-RHGWB-TE manual 2.2

vi Contents

6.2.2.2	Fabric	6–6
6.2.2.3	Arbitrated Loop Topology	6–7
6.3	Example Fibre Channel Configurations Supported by
	TruCluster Server	6–8

6.3.1Fibre Channel Cluster Configurations for Transparent

Failover Mode 6–8

6.3.2Fibre Channel Cluster Configurations for Multiple-Bus

		Failover Mode	6–10
6.4	Zoning and Cascaded Switches		6–13
6.4.1		Zoning	6–13
6.4.2		Cascaded Switches	6–14
6.5	Installing and Configuring Fibre Channel Hardware		6–15
6.5.1		Installing and Setting Up the Fibre Channel Switch	6–15
6.5.1.1		Installing the Switch	6–16
6.5.1.2		Managing the Fibre Channel Switches	6–17
6.5.1.2.1		Using the Switch Front Panel	6–17

6.5.1.2.2Setting the Ethernet IP Address and Subnet Mask

from the Front Panel 6–18

6.5.1.2.3Setting the DS-DSGGB-AA Ethernet IP Address

	and Subnet Mask from a PC or Terminal	6–20
6.5.1.2.4	Logging Into the Switch with a Telnet Connection	6–20
6.5.1.2.5	Setting the Switch Name via Telnet Session	6–21
6.5.2	Installing and Configuring the KGPSA PCI-to-Fibre
	Channel Adapter Module	6–22

6.5.2.1Installing the KGPSA PCI-to-Fibre Channel Adapter

Module ........................................................ 6–22

6.5.2.2Setting the KGPSA-BC or KGPSA-CA to Run on a

	Fabric	6–23
6.5.2.3	Obtaining the Worldwide Names of KGPSA Adapters	6–25
6.5.3	Setting up the HSG80 Array Controller for Tru64 UNIX
	Installation	6–26
6.5.3.1	Obtaining the Worldwide Names of HSG80 Controller	6–31
6.6	Preparing to Install Tru64 UNIX and TruCluster Server on
	Fibre Channel Storage	6–33
6.6.1	Configuring the HSG80 Storagesets	6–33
6.6.2	Setting the Device Unit Number	6–40
6.6.3	Setting the bootdef_dev Console Environment Variable ...	6–46
6.7	Install the Base Operating System	6–48
6.8	Resetting the bootdef_dev Console Environment Variable ..	6–49
6.9	Determining /dev/disk/dskn to Use for a Cluster Installation .	6–51
6.10	Installing the TruCluster Server Software	6–53
6.11	Changing the HSG80 from Transparent to Multiple-Bus
	Failover Mode	6–54