Compaq AA-RHGWB-TE manual Example 10-1 Displaying Configuration on an AlphaServer, P00 show config

Table 10–3: Installing a KZPSA-BB or KZPBA-CB for use with External Termination (cont.)

Step Action	Refer to:
TL890 with TL891/TL892	Section 8.7
TL894	Section 8.8
TL895	Section 8.9
TL893/TL896	Section 8.10
TL881/TL891 DLT MiniLibraries	Section 8.11
Compaq ESL9326D Enterprise Library	Section 8.12
_____________________ Notes	_____________________

If you install tape devices on the shared SCSI buses, ensure that you understand how the particular tape device(s) affect the shared SCSI bus.

The TL893, TL894, TL895, TL896, and ESL9326D have long internal SCSI cables; therefore, they cannot be externally terminated with a trilink/terminator combination.

These tape libraries must be on the end of the shared SCSI bus.

We recommend that tape devices be placed on a separate shared SCSI bus.

10.1.3Displaying KZPSA-BB and KZPBA-CB Adapters with the show Console Commands

Use the show config and show device console commands to display system configuration. Use the output to determine which devices are KZPSA-BBs or KZPBA-CBs, and to determine their SCSI bus IDs.

Example 10–1 shows the output from the show config console command on an AlphaServer 4100 system.

Example 10–1: Displaying Configuration on an AlphaServer 4100

P00>>> show config

Compaq Computer Corporation

			AlphaServer 4x00
Console V5.1-3 OpenVMS PALcode V1.19-14, Tru64					UNIX PALcode V1.21-22
Module			Type	Rev	Name
System Motherboard			0	0000	mthrbrd0
Memory	64	MB SYNC	0	0000	mem0
Memory	64	MB SYNC	0	0000	mem1
Memory	64	MB SYNC	0	0000	mem2
Memory	64	MB SYNC	0	0000	mem3

Configuring Systems for External Termination or Radial Connections to Non-UltraSCSI Devices 10–9