Compaq AA-RHGWB-TE manual Overview of Disk Storage Shelves, HD68 Trilink Connector H885-AA

Figure 9–5: HD68 Trilink Connector (H885-AA)

REAR VIEW

FRONT VIEW

ZK-1140U-AI

______________________ Note _______________________

If you connect a trilink connector to a SCSI bus adapter, you may block access to an adjacent PCI slot. If this occurs, use a Y cable instead of the trilink connector. This is the case with the KZPBA-CB and KZPSA-BB SCSI adapters on some AlphaServer systems.

Use the H879-AA terminator to terminate one leg of a BN21W-0B Y cable or H885-AA trilink.

Use an H8861-AA VHDCI trilink connector (see Figure 3–1) with a DS-BA35X-DA personality module to daisy chain two UltraSCSI BA356s or to terminate external to the UltraSCSI BA356 storage shelf. Use the H8863-AA VHDCI terminator with the H8861-AA trilink connector.

9.3 Overview of Disk Storage Shelves

The following sections provide an introduction to the BA350, BA356, and UltraSCSI BA356 disk storage shelves.

9–8Configurations Using External Termination or Radial Connections to Non-UltraSCSI Devices