Follow the steps in Table 10–1 to start the TruCluster Server hardware
installation procedure. You can save time by installing the Memory Channel
adapters, redundant network adapters (if applicable), and KZPSA-BB or
KZPBA-CB SCSI adapters all at the same time.
Follow the directions in the referenced documentation, or the steps in the
referenced tables for the particular SCSI host bus adapter, returning to the
appropriate table whenyou have completed the steps in the referencedtable.
_____________________ Caution _____________________
Static electricity can damage modules and electronic components.
We recommend using a grounded antistatic wrist strap and a
grounded work surface when handling modules.
Table10–1: Configuring TruCluster Server Hardware for Use with a PCI
SCSI Adapter
Step Action Refer to:
1Install the Memory Channel module(s),
cables, and hub(s) (if a hub is required). Chapter 5a
2Install Ethernet or FDDI network
adapters. User’s guide for the applicable
Ethernet or FDDI adapter,
and the user’s guide for the
applicable system
Install ATM adapters if using ATM. Chapter 7 and ATMworks 350
Adapter Installation and Service
3Install a KZPSA-BB PCI SCSI adapter or
KZPBA-CB UltraSCSI adapter for each
sharedSCSI busin eachmember system.
Internally terminated host bus adapter
for radial connection to DWZZH
UltraSCSI hub:
Section 10.1.1 and Table10–2
Externally terminated host bus adapter: Section 10.1.2 Table 10–3
aIfyou install additional KZPSA-BB or KZPBA-CB SCSI adapters or an extra network adapter at this time,
delaytesting the Memory Channeluntil you have installed all hardware.
10.1.1 Radial Installation of a KZPSA-BB or KZPBA-CB Using InternalTermination
Use this method of cabling member systems and shared storage in a
TruClusterServer cluster if you are using a DWZZH UltraSCSI hub. You
must reserve at least one hub port for shared storage.
10–2Configuring Systems for External Termination or Radial Connections
to Non-UltraSCSI Devices