3, the SCSI ID is 2. If it is installed in slots 3, 4, and 5, the SCSI ID is
4. Figure 8–3 shows a view of the DS-TZ89N-VW showing the backplane
interface connector and SCSI ID switch pack.
Figure 8–3: DS-TZ89N-VW SCSI ID Switches
Snap−in
Locking
Handles
SCSI ID
Switch Pack
Backplane
Interface
Connector
DS−TZ89N−VW
The SCSI ID is selected by switch positions, which must be selected before
the tape drive is installed in the BA356. Table8–2 shows the switch settings
for the DS-TZ89N-VW.
Table8–2: DS-TZ89N-VW Switch Settings
SCSI ID SCSI ID Selection Switches
12345678
AutomaticaOff Off Off Off On On On On
0Off Off Off Off Off Off Off Off
1On Off Off Off Off Off Off Off
8–6Configuring a Shared SCSI Bus for Tape Drive Use