Compaq AA-RHGWB-TE manual Press Enter. You can change your mind and not reboot

2.Press Enter to display the first submenu item in the configuration menu, Ethernet IP address:

Ethernet IP address: 10.00.00.10

--

The underline cursor denotes the selected address field.

Use the up or down button to increase or decrease the displayed number. Use the Tab/Esc button to select the next field. Modify the address fields until you have the address set correctly.

3.Use Enter to accept the value and step to the next submenu item (Ethernet Submask), and then repeat step 2 to set the Ethernet subnet mask.

4.Press Enter to accept the Ethernet subnet mask.

5.Press the Tab/Esc button repeatedly to get back to the top-level menu.

6.Press the down button to select the Operation Menu:

Select Menu: Operation Menu

7.If the switch is operational, place the switch off line before rebooting or you will lose any transmission in progress.

Press Enter to display the first submenu in the Operation Menu, Switch Offline:

Operation Menu: Switch Offline

8.Press the down button until the Reboot submenu item is displayed:

Operation Menu: Reboot

9.Press Enter. You can change your mind and not reboot:

Reboot

Accept? Yes No

10.Use the Tab/Esc button to select Yes. Press Enter to reboot the switch and execute the POST tests.

____________________ Note _____________________

After changing any configuration menu settings, you must reboot the switch for the change to take effect.

Refer to the switch documentation for information on other switch configuration settings.

Using Fibre Channel Storage 6–19