Compaq AA-RHGWB-TE manual Tables

8–6	Cabling a Shared SCSI Bus with a TZ885	8–15
8–7	TZ887 DLT MiniLibrary Rear Panel	8–16
8–8	Cabling a Shared SCSI Bus with a TZ887	8–17
8–9	TruCluster Server Cluster with a TL892 on Two Shared SCSI
	Buses	8–23
8–10	TL890 and TL892 DLT MiniLibraries on Shared SCSI Buses .	8–26
8–11	TL894 Tape Library Four-Bus Configuration	8–33
8–12	Shared SCSI Buses with TL894 in Two-Bus Mode	8–35
8–13	TL895 Tape Library Internal Cabling	8–39
8–14	TL893 Three-Bus Configuration	8–45
8–15	TL896 Six-Bus Configuration	8–46
8–16	Shared SCSI Buses with TL896 in Three-Bus Mode	8–48
8–17	TL891 Standalone Cluster Configuration	8–57
8–18	TL881 DLT MiniLibrary Rackmount Configuration	8–60
8–19	ESL9326D Internal Cabling	8–67
9–1	Standalone SCSI Signal Converter	9–4
9–2	SBB SCSI Signal Converter	9–4
9–3	DS-BA35X-DA Personality Module Switches	9–5
9–4	BN21W-0B Y Cable	9–7
9–5	HD68 Trilink Connector (H885-AA)	9–8
9–6	BA350 Internal SCSI Bus	9–10
9–7	BA356 Internal SCSI Bus	9–12
9–8	BA356 Jumper and Terminator Module Identification Pins ...	9–13
9–9	BA350 and BA356 Cabled for Shared SCSI Bus Usage	9–19
9–10	Two BA356s Cabled for Shared SCSI Bus Usage	9–21
9–11	Two UltraSCSI BA356s Cabled for Shared SCSI Bus Usage ..	9–23
9–12	Externally Terminated Shared SCSI Bus with Mid-Bus HSZ50
	RAID Array Controllers	9–26
9–13	Externally Terminated Shared SCSI Bus with HSZ50 RAID
	Array Controllers at Bus End	9–27
9–14	TruCluster Server Cluster Using DS-DWZZH-03, SCSI
	Adapter with Terminators Installed, and HSZ50	9–30
9–15	TruCluster Server Cluster Using KZPSA-BB SCSI Adapters,
	a DS-DWZZH-05 UltraSCSI Hub, and an HSZ50 RAID Array
	Controller	9–31
10–1	KZPSA-BB Termination Resistors	10–18

Tables

2–1	AlphaServer Systems Supported for Fibre Channel	2–4
2–2	RAID Controller SCSI IDs	2–7
2–3	Supported SCSI Cables	2–10

Contents xiii