Compaq AA-RHGWB-TE manual Xii Contents

1–2	Generic Two-Node Cluster with Minimum Disk Configuration
	and Quorum Disk	1–7
1–3	Minimum Two-Node Cluster with UltraSCSI BA356 Storage
	Unit	1–9
1–4	Two-Node Cluster with Two UltraSCSI DS-BA356 Storage
	Units	1–11
1–5	Two-Node Configurations with UltraSCSI BA356 Storage
	Units and Dual SCSI Buses	1–13
1–6	Cluster Configuration with HSZ70 Controllers in Transparent
	Failover Mode	1–14
1–7	NSPOF Cluster using HSZ70s in Multiple-Bus Failover Mode	1–16
1–8	NSPOF Fibre Channel Cluster using HSG80s in Multiple-Bus
	Failover Mode	1–17
3–1	VHDCI Trilink Connector (H8861-AA)	3–8
3–2	DS-DWZZH-03 Front View	3–10
3–3	DS-DWZZH-05 Rear View	3–14
3–4	DS-DWZZH-05 Front View	3–15
3–5	Shared SCSI Bus with HSZ70 Configured for Transparent
	Failover	3–20
3–6	Shared SCSI Bus with HSZ80 Configured for Transparent
	Failover	3–21
3–7	TruCluster Server Configuration with HSZ70 in Multiple-Bus
	Failover Mode	3–24
3–8	TruCluster Server Configuration with HSZ80 in Multiple-Bus
	Failover Mode	3–25
4–1	KZPBA-CB Termination Resistors	4–18
5–1	Connecting Memory Channel Adapters to Hubs	5–9
6–1	Point-to-Point Topology	6–6
6–2	Fabric Topology	6–7
6–3	Arbitrated Loop Topology	6–8
6–4	Fibre Channel Single Switch Transparent Failover
	Configuration	6–9
6–5	Multiple-Bus NSPOF Configuration Number 1	6–11
6–6	Multiple-Bus NSPOF Configuration Number 2	6–12
6–7	Multiple-Bus NSPOF Configuration Number 3	6–13
6–8	A Simple Zoned Configuration	6–14
7–1	Emulated LAN Over an ATM Network	7–3
8–1	TZ88N-VA SCSI ID Switches	8–2
8–2	Shared SCSI Buses with SBB Tape Drives	8–4
8–3	DS-TZ89N-VW SCSI ID Switches	8–6
8–4	Compaq 20/40 GB DLT Tape Drive Rear Panel	8–10
8–5	Cabling a Shared SCSI Bus with a Compaq 20/40 GB DLT
	Tape Drive	8–12

xii Contents