Compaq AA-RHGWB-TE 8.12 Compaq ESL9326D Enterprise Library

•DLT3 Bus ID: 4

•DLT4 Bus ID: 5

•DLT5 Bus ID: 6

7. Press Enter when you have the item selected for which you wish to

change the SCSI ID.

8. Use the up and down arrowsto select the desired SCSI ID. Press the

Enter button to save the new selection.

9. Press the Escape button once to returnto the Set SCSI Submenu to

select another tape drive or the library robotics, and then repeat steps 6,

7, and 8 to set the SCSI ID.

10. If there are other items you wish to configure, press the Escape button

until the Configure submenu is displayed, then select the item to be

configured. Repeat this procedure for each item you wish to configure.

11. If there are no more items to be configured, press the Escape button

until the Default window is displayed.

______________________ Note _______________________

Youdo not have to cycle power to set the SCSI IDs.

8.12 Compaq ESL9326D Enterprise Library

The topics in this section provide an overview and hardware configuration

information on preparing the ESL9326D Enterprise Library for use on a

shared SCSI bus with the TruCluster Server.

The Compaq StorageWorks ESL9326D Enterprise Library is the first

building block of the Compaq ESL 9000 series tape library.

Formore information on the ESL9326D Enterprise Library, see the following

Compaq StorageWorksESL9000 SeriesTape Library documentation:

•Unpacking and Installation Guide (146585-001)

•Reference Guide (146583-001)

•Maintenance and Service Guide (155898-001)

•TapeDrive Upgrade Guide (146582-001)

8–64 Configuring a Shared SCSI Bus for Tape Drive Use