CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “ :0” and a tone will sound. If the AC power ever goes off, the display shows “ : 0” when the power comes back on.
| 1. Touch Clock pad. |
| |
Clock | This is a 12 hour clock system. |
|
|
2.Touch Clock pad once more. This is a 24 hour clock system.
3.Enter the correct time of day by touching the time set pads.
NOTE : This oven has multiple clock systems. If you want 12 hour clock system, omit this step.
4. Touch Clock pad.
Clock
The display stops blinking, and the colon starts blinking. If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Touch the Clock pad and
TIME DEFROSTING
When Defrost is selected, the automatic cycle divides the defrosting time into periods of alternating defrost and stand times by cycling on and off.
Defrost
1. Touch Defrost pad. | The Def. indicator lights and “ : 0” is displayed. |
The display will show what you touched.
2.Touch the time set pads for the desired time.
Note : Your oven can be programmed for 59 minutes 90 seconds. ( 59 : 90 )
3. Touch START pad.
When you touch START pad, the Def. indicator starts blinking to show the oven is in the DEFROST mode. The display counts down the time to show you how much defrosting time is left in the DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When the defrosting time ends, you will hear 3 beeps.
8