Lexmark Optra C710 manual Menu settings page on a sheet of paper, Setting

Other printing problems (continued)

Problem	Action
Transparencies jam.	Fan transparencies before loading. Make sure you only load transparencies in
	tray 1 or the multipurpose feeder.
	If you just turned the printer on or the printer has been idle for a period of time,
	print on paper before trying to print on transparencies. For example, before
	printing transparencies, select Print Menus from the Utilities Menu and print the
	menu settings page on a sheet of paper.
	Disabling Power Saver may also prevent transparencies from jamming after the
	printer has been idle. See page 38 for more information about the Power Saver
	setting.
You cannot remove paper jammed	Remove the fuser unit and remove the jammed paper. See page 131 for more
in the fuser.	information.
You cannot clear the paper jam	To clear the paper jam messages, you must remove all paper from the printer’s
message.	paper path. Check both inside the printer as well as the paper source you were
	using. Then open and close the front cover and fuser cover and press Go.
The page that jammed does not	Set Jam Recovery to Auto or to On in the Setup Menu. See page 41 for more
reprint after you clear the jam.	information.

Chapter 8: Identifying other problems 167