Lexmark Optra C710 Allocating memory, Default input buffer size, 32MB 192K 150K, 150K 64MB, 300K

	Allocating memory		A portion of printer memory is reserved for input buffers
			that hold print jobs sent from your software application.
			Your printer has an input buffer for each interface (paral-
			lel, serial, network, LocalTalk, or infrared). You can change
			the amount of memory allocated to each buffer, depend-
			ing on your system requirements. For more information
			about using printer menus to allocate memory for each
			interface, see the description of the various interface
			menus in Chapter 3.
			The size of the input buffers varies with the amount of
			memory installed in the printer. The following table lists
			the default size of the input buffers for each interface. If
			your printer is not using a particular interface, the allo-
			cated memory is reserved for job processing.
			For more detailed information about these input buffers
			and memory allocation, refer to the Technical Reference.
Default input buffer size
Installed
memory	Each parallel port	Each serial port		Each network port	LocalTalk port	Infrared port
32MB	192K 1	150K		1MB	1MB	150K
64MB	2MB	300K		2MB	2MB	300K
128MB
1 1MB allocated to standard parallel port if no optional adapter is installed.

Chapter 5: Adding memory 91