Lexmark Optra C710 manual About the parallel interface, Honor Init Off, Turned on and off

Parallel Menu (continued)

Menu item		Values
Protocol	Standard
		Fastbytes*
		You can select Standard or Fastbytes protocol for the parallel interface. Fastbytes is
		compatible with most existing parallel interface implementations. Use Standard only if you
		experience parallel interface problems. Refer to the Technical Reference for more information
		about the parallel interface.
Honor Init		Off*
		On
		The Honor Init setting determines whether the printer honors hardware initialization requests
		from the computer. The computer requests initialization by activating the INIT signal on the
		parallel interface. Many personal computers activate the INIT signal each time the computer is
		turned on and off.
Parallel Mode 1		Off
		On*
		This setting enables or disables the pull up resistors on the parallel port signals. It is useful for
		personal computers that have open collector outputs on the parallel port signals. Set Parallel
		Mode 1 On to disable the resistors or Off to enable the resistors.
		Refer to the Technical Reference for more information about this setting.
Parallel Mode 2		Off
		On*
		This setting determines if the parallel port data is sampled on the leading or trailing edge of
		strobe. If Parallel Mode 2 is set On, the parallel port data is sampled on the leading edge of
		strobe. The parallel port data is sampled on the trailing edge of strobe if Parallel Mode 2 is set
		Off.
		Refer to the Technical Reference for more information about this setting.
*Factory default

Chapter 3: Menus 51