Creda CM31GI manual Electrical Connection, This Appliance Must be Earthed

Page 4

ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

GB

4

Image 4
Contents Instructions for Installation and Use Contents Product Safety InstallationElectrical Connection This Appliance Must be EarthedTemperature control GET to Know Your ApplianceStoring food in the Refrigerator Compartment Getting Your Appliance Ready for USEWhat not to store in the Refrigerator Page How to use the freezer compartment Food Storage Meat and FishTenderising Days MonthsFruits and Vegetables MonthsInstall the Appliance Correctly Energy Saving TipsCleaning and Special Maintenance How to Defrost the RefrigeratorHow to Defrost the Freezer Caring for Your ApplianceTroubleshooting Nothing worksRefrigerator and the freezer do not cool properly Food inside the refrigerator is too coldGB14 Page 195.037.028.00 April 2003 Part no. FP193

CM31GI specifications

The Creda CM31GI is a versatile and efficient cooker's range that brings a blend of traditional cooking methods and modern technologies to the kitchen. It is designed to meet the needs of both professional chefs and home cooks, providing a reliable solution for preparing a variety of dishes with ease and precision.

One of the standout features of the CM31GI is its powerful gas hob, which is equipped with four high-performance burners. These burners offer varying heat levels, making it possible to simmer delicate sauces or boil water rapidly, depending on the cooking requirements. The design includes a cast iron pan support, which ensures durability and stability, providing an ideal surface for all types of cookware.

The main oven of the Creda CM31GI is a fan-assisted model, which ensures even heat distribution for optimal cooking results. Whether baking a cake or roasting a joint of meat, the fan system eliminates cold spots, allowing for consistent cooking throughout. Furthermore, the oven has a generous capacity, making it perfect for larger meals when hosting family and friends.

Another notable aspect is the grill function, which is perfect for quick browning and grilling of meats and vegetables. With adjustable settings, users can achieve the perfect level of cooking for their recipes, enhancing flavor and texture. The large window and internal light offer excellent visibility, allowing you to monitor cooking progress without opening the oven door.

The Creda CM31GI is also designed with user convenience in mind. Its simple-to-use control panel provides easy access to all settings, ensuring that adjustments can be made quickly while cooking. The product incorporates safety features such as flame failure devices, which automatically cut off gas supply if the flame goes out, offering peace of mind for users.

Cleaning the CM31GI is made straightforward with its easy-clean enamel lining. This technology helps prevent food from sticking and simplifies the cleaning process, allowing you to spend more time enjoying your meals rather than scrubbing the oven.

In summary, the Creda CM31GI combines robust construction, thoughtful design, and modern cooking technology. With its powerful gas burners, efficient oven, and easy-to-use features, it is an excellent choice for anyone looking to elevate their cooking experience while ensuring safety and convenience in the kitchen.