Danby DWC518BLS owner manual Operating Instructions Wine Storage

Operating Instructions

Wine

Storage

The *maximum capacity of the DWC518BLS is 51 (750ml) wine bottles.

*When stocked as per instructions

In order to achieve the maximum storage capacity of fifty-one (51) bottles, it will be necessary to posi- tion the bottles alternately on the upper five (5) shelves, as shown in Fig A. This will allow for the stor- age of nine (9) 750 ml bottles per shelf in each of the top five shelves, and six (6) bottles on the bottom shelf (Fig B), for a total storage capacity of fifty-one (51) wine bottles.

Fig A

Fig B

IMPORTANT!

Shelf Instructions Do not cover any part of the shelves with aluminum foil or any other mate- rial that will prevent adequate air circulation within the cabinet.

To remove a roller-shelf (Fig.C):

1.Gently slide the shelf outward until it meets resistance.

2.Tilt the shelf slightly upwards (approximately 15°) and carefully remove the shelf by sliding it outward from the cabinet.

15°

2

1

Fig. C

To reinstall a roller-shelf:

1.Set the shelf’s wheels upon the front of the wheel track.

2.Tilt the front of the shelf

slightly upwards (approxi- mately 15°), and begin to gently slide the shelf into the cabinet until the shelf’s roller- wheels slide naturally within the wheel track.

To remove the bottom shelf:

1.Grasp the top, wooden area of the shelf with your hand.

2.While grasping the shelf, gently apply upward pressure to the back of the shelf and downward pressure to the front of the shelf.

3.Begin to slowly pull the shelf outward until it unhooks from the stoppers, and then remove the shelf from the cabinet.

To reinstall the bottom shelf (Fig. D):

1.Slide the shelf beneath the track that is directly above the track you want the shelf to rest on.

2.Once the back-end of the shelf is in contact with the back wall of the cabinet, lower the shelf onto the track.

1

2

Fig. D

7