Operating Instructions
The Controls of your
Wine Cooler
4
| Upper chamber | Lower chamber |
RUN | C | C |
1 | F | F |
| ||
Activation |
| |
| CHAMBRE SUPÉRIEURE | CHAMBRE INFÉRIEURE |
Set Upper
REGLER SUPÉRIEURE
5
Set Lower
REGLER INFÉRIEURE
2 | 3 |
1.Run: Indicator light illuminates to signify that the cooling mode is currently in operation.
2.Upper chamber display: Display screen shows current cabinet temperature and set temperature of the upper zone.
3.Lower chamber display: Display screen shows current cabinet temperature and set temperature of the lower zone.
4.°C/°F: Adjacent indicator light denotes which scale of temperature is displayed.
5.‘Set Upper’ button: Used to set the temperature in the upper zone (see ‘Setting the Temperature’ below).
‘Set Lower’ button: Used to set the temperature in the lower zone (see ‘Setting the Temperature’ below).
Setting the
Temperature
I M P O R TA N T !
In the event of a power failure, wait 3 to 5 minutes before restarting.
•To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the ‘Set Upper’ and ‘Set Lower’ control buttons simultaneously for approxi- mately five (5) seconds.
•The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine storage requirements. Each depression of the ‘Set Upper’ or ‘Set Lower’ button will allow you to adjust the temperature in 1° incre- ments within the aforemen- tioned range.
•You may view your ‘set’ tem- perature at any time by briefly depressing either the ‘Set Upper’ or ‘Set Lower’ button. The set temperature will flash in the display area for 5 sec- onds before the display resumes showing the current cabinet temperature.
6