NDA 1402
Rear view equipment used for text reference
Heaters
12V DC Burner control
Protection cover
Flue baffle
Thermofuse
Burner jet
FIG. 1
Manual gas shut off valve
Inlet fitting
Thermostat
Flexible cord Ice maker
Flexible cord
Refrigerator
Power module and fuses
12V DC
Drain water hose |
Heating cabel
Water hose Ice maker
Water solenoid valve
12 Volt DC Terminal block
GENERAL INSTRUCTION
This appliance is designed for storage of foods and storage of frozen foods and making ice.
This appliance is certified under the latest edition of ANSI Z21.19•CSA 1.4 Refrigerators using gas fuel.
The installation must conform with local codes, or in ab- sence of local codes, the following standards as appli- cable.
In the U.S. the installation must conform with:
1.National Fuel Gas Code, ANSI Z223.1/NFPA 54 (latest edition).
2.Recreational Vehicles Code, ANSI A119.2 (latest edition)
3.Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.
If an external electrical source is utilized, the refrigera- tor, when installed, must be electrically grounded in ac- cordance with local codes or, in the absence of local codes, the National Electrical Code, ANSI/NFPA 70 - (lat- est edition).
In CANADA, the installation must conform with:
1.Natural Gas and Propane Installation Code, CSA B149.1
2.CSA Z240 RV Series, Recreational Vehicles.
3.Current CSA Z240.4,
If an external electrical source is utilized, the refrigera- tor, when installed, must be electrically grounded in ac- cordance with local codes or, in the absence of local codes, the Canadian Electrical Code, CSA C22.1, Parts
Iand II - (latest edition).
3