Dometic DM2862 Installation procedure, Installing the refrigerator Securing the refrigerator

Page 7

installation procedure

Installing the refrigerator

Securing the refrigerator

Be careful when installing the refrigerator models NDM1062 & NDR1292. These are equipped with the latest vacuum insulated panel technology. The insu- lating panels are located on the top, back, bottom, sides and doors. If the surface is punctured, loss of insulation will occur, resulting in poor refrigerator performance.

For a proper installation, follow these instructions:

•Make sure the floor is solid and level.

•The refrigerator must be level and installed in a substantial enclosure.

•Do not install the appliance directly on carpeting. Carpet- ing must be removed or protected by a metal or wood panel beneath the appliance, which extends at least full width and depth of the appliance.

•RM2451, RM2454, RM2551, RM2554, DM2652, DM2662, DM2663, DM2852, DM2862, DM3862, NDM1062 & NDR1292

A wood strip must be in place across the up-

 

per opening of the enclosure. The top frame

 

of the refrigerator will be anchored to the

 

wood strip with screws.

7OODDSTRIP

•When installing the refrigerator in the enclosure, all areas within the recess have to be sealed. Verify that there is a complete seal between the front frame of the refrigerator and the top, sides and bottom of the enclosure. A length of seal- ing strip is applied to the rear surface of the front frame for this purpose. The sealing strip should provide a complete isolation of the appliance’s combustion system from the vehicle interior.

RM2351 and RM2354: Apply a sealing strip to the foremost floor of the enclosure.

Be careful not to damage the sealing strip when the refrigerator is put in place!

It is important to follow the sequence in securing refrigerator in enclosure since failure in doing so can cause leakage be- tween the frame and cabinet. Any space between the counter, storage area or ceiling and top of the refrigerator greater than 1 1/2 inches should be blocked. The heat produced at the rear of the refrigerator will become trapped in this space, making the top of the refrigerator hot and reduce the efficiency of the refrigerator.

After the refrigerator is put in place (ensuring a combustion seal at the front frame), the refrigerator is to be secured in the enclosure with screws (not included).

RM2351 & RM2354

Install the five screws in the following order:

1.Four screws installed through the front frame.

(To cover the screw heads, use the plugs in the parts bag.)

2.One screw installed in the rear base.

2

1

RM2451, RM2454, RM2551,

RM2351& RM2354

RM2554, DM2652, DM2662,

 

DM2663, DM2852, DM2862,

 

DM3862, NDM1062 & NDR1292

 

General view. Features may vary according to model.

- 7 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Operating Instructions Page Introduction ContentsGeneral information CANADA, the installation must conform withCertification and Code Requirements Ventilation requirementsSide view with duct system Ventilation heightsClearances Minimum ventilation heightsModel Overall and recess dimensionsInstalling the refrigerator Securing the refrigerator Installation procedureTwo screws installed in the rear base Two screws installed in the top frameOne screw installed in the rear base Screws installed in the top frameDrain water hose Testing LP gas safety shut offConnections Gas connection AC connection Electrical connection12V DC connection With screws Door mounting instructionsReversing the door swing Mounting the door panelsSnap Refrigerator removalTo mount the panel, follow these steps Automatic energy selector system Refrigerator overviewAbsorption cooling system Leveling the refrigeratorThermostat Limp mode of operationClimate control system Low ambient controlRM2354, RM2454, RM2554 & DM2663 Control panel RM2351, RM2451, RM2551, DM2652 & DM2852DM2662, DM2862 & NDM1062 Climate control button Low ambient control button AES/AUTO/GAS mode selector buttonDM3862, NDM1062 & NDR1292 NDR1292Turning on the low ambient control Instructions for useStartup Turning on the climate controlFrozen food storage compartment Refrigerator volumeStorage compartments Food storage compartmentRemoving and replacing the shelves Replacing the halogen lamp CleaningProduct care DefrostingDM2652, DM2662, DM2663, DM2852 & DM2862 Airing position cardElectric equipment Heater Maintenance & serviceFuses Checking the LP gas pressure Periodic maintenance Checking the control systemCleaning the flue baffle and burner Checking the connectionsSymptom Check/Remedial action TroubleshootingAppendix a spare parts Bottle holder, 2 pieces Dometic website Appendix B consumer supportAppendix C Dometic warranty & maintenance schedule Valuable Dometic Refrigerator Warranty Maintenance ScheduleLimited three-year warranty Dometic refrigerators 234 9%!2 #/.$ 9%!2 Refrigerator owner maintenance yearly recordRM2351 Appendix D rearview equipmentRM2451, RM2454, RM2551 & RM2554 NDR1292 Appendix e wiring diagrams DM2652, DM2662, DM2852 & DM2862 DM2663 NDM1062 Heating Cable RED Terminal Protection for Your New Investment Plus 3 service contract Warranty verification Owner confirmationFactory communication

DM2862 specifications

The Dometic DM2862 is a high-performance refrigerator designed for those who crave adventure while still valuing the comforts of home. This versatile appliance is engineered to cater to outdoor enthusiasts, campers, and anyone seeking reliable refrigeration without compromising quality. With its sleek design and robust features, the DM2862 stands out as an ideal choice for RVs, boats, and off-grid living.

One of the standout features of the Dometic DM2862 is its dual-power capability, allowing it to run on either propane or electricity. This versatility ensures that users can select the most convenient energy source based on their situation, making it perfect for remote locations. The refrigerator boasts an impressive capacity of 6 cubic feet, providing ample storage space for food and beverages, ensuring that you never run out of supplies during your travels.

The DM2862 incorporates Dometic's innovative Energy Efficiency technology, which optimizes energy consumption while maintaining cool temperatures. This feature is essential not only for saving on energy costs but also for extending the lifespan of the appliance. The refrigerator is designed with an automatic temperature control system, ensuring that the interior remains at a consistent and optimal temperature, regardless of external conditions.

In addition to its impressive cooling capabilities, the Dometic DM2862 is equipped with user-friendly features such as a digital thermostat and adjustable shelves. The digital interface allows for precise temperature adjustments, while the adjustable shelves enable customization of storage space to accommodate larger items easily. The unit also features a removable freezer compartment, allowing for added flexibility depending on your refrigeration needs.

Durability is another characteristic that sets the Dometic DM2862 apart from competitors. The exterior is built with materials resistant to rust and corrosion, ensuring that it withstands the rigors of outdoor use. Furthermore, the refrigerator operates quietly, making it a perfect addition to any living space without causing disturbances.

Overall, the Dometic DM2862 combines functionality with advanced technology to provide a reliable and efficient refrigeration solution for adventurers and travelers alike. Its dual power options, energy-efficient design, and user-centric features make it an indispensable companion for anyone looking to explore the great outdoors while keeping their perishables fresh and cool. Whether for a weekend getaway or an extended journey, the Dometic DM2862 ensures you have the comfort of home wherever your adventures take you.
Top Page Image Contents