Drain water hose, Connections Gas connection

installation procedure

Drain water hose

Drill a hole through flooring. To avoid damage to the hose, the hole must be positioned so that the hose doesn’t touch the boiler casing. Seal around the hose that goes through the drilled hole and ensure that it does not kink when run through the floor. Check to make sure that the supplied hose is long enough in order for the water to drain outside of the vehicle. If not, the installer will have to supply the extra length of hose.

Connections

Gas connection

Hook up to the gas supply line is accomplished at the manual gas valve, which is furnished with a 3/8” SAE (UNF 5/8” -18) male flare connection. All completed connections should be examined for leaks using a solution of liquid detergent and water.

RM2351 & RM2354

Boiler

casing

Hose

Hole for drain

water hose

RM2451, RM2454, RM2551, RM2554, DM2652, DM2662,

DM2663, DM2852, DM2862, DM3862 & NDM1062

Boiler

casing

Hose

Hole for drain

water hose

NDR1292

Boiler	Hose
casing	Hose	Drill the hole in the
		cut out opening of
		the base plate
	Hole for drain
	water hose

6! warning

EXPLOSION HAZARD. Never use an open flame to check for gas leaks. Failure to heed this warning could cause an explosion resulting in death or severe personal injury.

The gas supply system must incorporate a pressure regulator to maintain a supply pressure of not more than 11 inches water column. When testing the gas supply system at test pressures:

•> 1/2 psi - the refrigerator and its individual shutoff valve must be disconnected from the gas supply piping system.

•≤ 1/2 psi - the appliance must be isolated from the gas supply piping system by closing its individual manual shut- off valve.

If detailed instructions on the installation and connection to the gas supply are required, please contact your dealer or distributor.

Testing LP gas safety shut off

The gas safety shut off must be tested after the refrigerator is connected to LP gas supply.

RM2354, RM2454, RM2554, DM2662, DM2663, DM2862, DM3862, NDM1062 & NDR1292

To test the gas safety shut off, follow these steps:

1.Start the refrigerator. Switch to GAS mode.

2.Check that the gas flame is lit and the GAS mode indicator lamp is on.

3.Close the manual gas shutoff valve at the back of the refrigerator.

4.Wait for approx. 6 minutes. The CHECK indicator lamp should be lit and the GAS mode indicator lamp should be off.

5.Remove the protection cover.

6.Open the manual gas shutoff valve. Do not change any button positions on the control panel.

7.Apply a non corrosive commercial bubble solution to the burner jet orifice. No bubbles should appear at the opening of the burner jet orifice. The presence of bubbles indicates a defective gas safety shutoff, and service is required.

8.If no bubbles are present at the burner jet orifice, rinse it with fresh water. Be careful not to damage the burner jet orifice.

- 9 -

DM2862 specifications

The Dometic DM2862 is a high-performance refrigerator designed for those who crave adventure while still valuing the comforts of home. This versatile appliance is engineered to cater to outdoor enthusiasts, campers, and anyone seeking reliable refrigeration without compromising quality. With its sleek design and robust features, the DM2862 stands out as an ideal choice for RVs, boats, and off-grid living.

One of the standout features of the Dometic DM2862 is its dual-power capability, allowing it to run on either propane or electricity. This versatility ensures that users can select the most convenient energy source based on their situation, making it perfect for remote locations. The refrigerator boasts an impressive capacity of 6 cubic feet, providing ample storage space for food and beverages, ensuring that you never run out of supplies during your travels.

The DM2862 incorporates Dometic's innovative Energy Efficiency technology, which optimizes energy consumption while maintaining cool temperatures. This feature is essential not only for saving on energy costs but also for extending the lifespan of the appliance. The refrigerator is designed with an automatic temperature control system, ensuring that the interior remains at a consistent and optimal temperature, regardless of external conditions.

In addition to its impressive cooling capabilities, the Dometic DM2862 is equipped with user-friendly features such as a digital thermostat and adjustable shelves. The digital interface allows for precise temperature adjustments, while the adjustable shelves enable customization of storage space to accommodate larger items easily. The unit also features a removable freezer compartment, allowing for added flexibility depending on your refrigeration needs.

Durability is another characteristic that sets the Dometic DM2862 apart from competitors. The exterior is built with materials resistant to rust and corrosion, ensuring that it withstands the rigors of outdoor use. Furthermore, the refrigerator operates quietly, making it a perfect addition to any living space without causing disturbances.

Overall, the Dometic DM2862 combines functionality with advanced technology to provide a reliable and efficient refrigeration solution for adventurers and travelers alike. Its dual power options, energy-efficient design, and user-centric features make it an indispensable companion for anyone looking to explore the great outdoors while keeping their perishables fresh and cool. Whether for a weekend getaway or an extended journey, the Dometic DM2862 ensures you have the comfort of home wherever your adventures take you.