Dometic DM2862 manual Two screws installed in the top frame, One screw installed in the rear base

Page 8

installation procedure

RM2451, RM2454, RM2551, RM2554, DM2652, DM2662, DM2663, DM2852, DM2862, DM3862 & NDM1062

Install the screws in the following order:

1.Two screws installed through the front base. (Installation of the lower front strip.)

The refrigerator is provided with a lower front strip

(shipped as a loose part). Attach the front strip after the refrigerator is set into the cutout opening.

a)Install the lower front strip by sliding it under the bottom hinge plate. The hinge plate can be on the right or left side depending on the door swing.

Once the lower front strip is slipped under the hinge, the part is possible to swing into place.

b)Secure the refrigerator and the lower front strip with two screws: One screw through the hinge and on the opposite side and then, one screw through the lower front strip.

2.Two screws installed in the top frame.

a)Open the door. Gently push the tabs out of the hole in the hinge

with a flat blade screwdriver

 

(both sides).

2

 

b) Carefully tilt the top decoration panel and lift to remove from

top frame. Be careful not to 1 damage the circuit board and wires.

c)Install the two screws in the top frame, the holes are accessible from underneath.

d)Seal the opening for the screws with aluminum tape.

e)Replace the top decoration panel. Be careful not to pinch the wires behind the panel. Make sure the tabs snap back into the holes in the hinge plate.

3.One screw installed in the rear base.

NDR1292

Install the screws in the following order:

1.Two screws installed through the front base. (Installation of the lower front strip.)

The refrigerator is provided with a lower front strip

(shipped as a loose part). Attach the front strip after the refrigerator is set into the cutout opening.

a)Install the lower front

strip by slid- ing it under the bottom hinge plate.

b) Secure the refrigerator and the lower front strip with two screws: One screw through each hinge.

2.Screws installed in the top frame.

a)Open the doors and remove

the four screws that secure the top decoration panel to the

top frame. Two screws are ac- cessible from underneath and two are located on each side of

the lock retainer securing the

decoration panel to the front frame. Save screws for reinstallation of the top decoration panel.

b)See step 2, b-e in the previous instruction.

3.Two screws installed in the rear base.

- 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Operating Instructions Page Contents IntroductionCANADA, the installation must conform with Certification and Code RequirementsVentilation requirements General informationVentilation heights ClearancesMinimum ventilation heights Side view with duct systemOverall and recess dimensions ModelInstallation procedure Installing the refrigerator Securing the refrigeratorTwo screws installed in the top frame One screw installed in the rear baseScrews installed in the top frame Two screws installed in the rear baseConnections Gas connection Testing LP gas safety shut offDrain water hose 12V DC connection Electrical connectionAC connection Door mounting instructions Reversing the door swingMounting the door panels With screwsTo mount the panel, follow these steps Refrigerator removalSnap Refrigerator overview Absorption cooling systemLeveling the refrigerator Automatic energy selector systemLimp mode of operation Climate control systemLow ambient control ThermostatDM2662, DM2862 & NDM1062 Control panel RM2351, RM2451, RM2551, DM2652 & DM2852RM2354, RM2454, RM2554 & DM2663 AES/AUTO/GAS mode selector button DM3862, NDM1062 & NDR1292NDR1292 Climate control button Low ambient control buttonInstructions for use StartupTurning on the climate control Turning on the low ambient controlRefrigerator volume Storage compartmentsFood storage compartment Frozen food storage compartmentRemoving and replacing the shelves Cleaning Product careDefrosting Replacing the halogen lampAiring position card DM2652, DM2662, DM2663, DM2852 & DM2862Fuses Maintenance & serviceElectric equipment Heater Periodic maintenance Checking the control system Cleaning the flue baffle and burnerChecking the connections Checking the LP gas pressureTroubleshooting Symptom Check/Remedial actionAppendix a spare parts Bottle holder, 2 pieces Appendix B consumer support Dometic websiteValuable Dometic Refrigerator Warranty Maintenance Schedule Appendix C Dometic warranty & maintenance scheduleLimited three-year warranty Dometic refrigerators Refrigerator owner maintenance yearly record 234 9%!2 #/.$ 9%!2Appendix D rearview equipment RM2351RM2451, RM2454, RM2551 & RM2554 NDR1292 Appendix e wiring diagrams DM2652, DM2662, DM2852 & DM2862 DM2663 NDM1062 Heating Cable RED Terminal Protection for Your New Investment Factory communication Warranty verification Owner confirmationPlus 3 service contract

DM2862 specifications

The Dometic DM2862 is a high-performance refrigerator designed for those who crave adventure while still valuing the comforts of home. This versatile appliance is engineered to cater to outdoor enthusiasts, campers, and anyone seeking reliable refrigeration without compromising quality. With its sleek design and robust features, the DM2862 stands out as an ideal choice for RVs, boats, and off-grid living.

One of the standout features of the Dometic DM2862 is its dual-power capability, allowing it to run on either propane or electricity. This versatility ensures that users can select the most convenient energy source based on their situation, making it perfect for remote locations. The refrigerator boasts an impressive capacity of 6 cubic feet, providing ample storage space for food and beverages, ensuring that you never run out of supplies during your travels.

The DM2862 incorporates Dometic's innovative Energy Efficiency technology, which optimizes energy consumption while maintaining cool temperatures. This feature is essential not only for saving on energy costs but also for extending the lifespan of the appliance. The refrigerator is designed with an automatic temperature control system, ensuring that the interior remains at a consistent and optimal temperature, regardless of external conditions.

In addition to its impressive cooling capabilities, the Dometic DM2862 is equipped with user-friendly features such as a digital thermostat and adjustable shelves. The digital interface allows for precise temperature adjustments, while the adjustable shelves enable customization of storage space to accommodate larger items easily. The unit also features a removable freezer compartment, allowing for added flexibility depending on your refrigeration needs.

Durability is another characteristic that sets the Dometic DM2862 apart from competitors. The exterior is built with materials resistant to rust and corrosion, ensuring that it withstands the rigors of outdoor use. Furthermore, the refrigerator operates quietly, making it a perfect addition to any living space without causing disturbances.

Overall, the Dometic DM2862 combines functionality with advanced technology to provide a reliable and efficient refrigeration solution for adventurers and travelers alike. Its dual power options, energy-efficient design, and user-centric features make it an indispensable companion for anyone looking to explore the great outdoors while keeping their perishables fresh and cool. Whether for a weekend getaway or an extended journey, the Dometic DM2862 ensures you have the comfort of home wherever your adventures take you.
Top Page Image Contents