Instructions for Mounting Door Panel, Lower door

INSTRUCTIONS FOR MOUNTING THE DOOR PANEL

INSTRUCTIONS FOR MOUNTING

THE DOOR PANEL

The refrigerator is normally delivered without door panel(s). Before starting the mounting work check that the panel dimensions are in compliance with those given in the table and read the instructions through. When mounting the panel, proceed as follows.

A.Remove the door decoration list (2) with its two screws (1 j.The upper corners of the upper panel (2-door models) and the lower corners of the lo- wer panel has to be cut according to the sketch.

B.Insert one of the vertical edges of the panel into the groove of the door frame (3).

C.Bend the panel gently so that the free side of the panel can be sled into the corresponding groove of the door frame (4).

D.Push the panel downwards so that the lower ho- rizontal edge of the panel is fitted into the bottom groove (5).

E.Between the upper edge of the panel and the door frame there is now a gap which should be covered by the decoration strip.

F.Put the strip across the door so that the gap is covered and pushed upwards (6). The tabs on the inside of the strip should fit in behind the flange of the door frame. Secure the decoration strip by means of the two screws (1).

Panel dimensions					~22 3/8
inch		32 29/32 32 27/3			~22 3/8
Thi kness max. 4 mm			5/32 inches
		HEIGHT		WIDTH
		MAX.	MIN.	MAX.	MIN.
RM2301 mm
RM2401 mm			1 ;::I32 1	;;:/I6 1
		::3/32	1 ;::I32 1	;;:/I6 1
RM2501	m m
upper	mm
upper	mm				568
RM2601					22 3/8
lower	mm				568

upper	mm	395	393	618	616
RM2801	inch	15 17/3	15 15/32	24 5/16	24 1/4
lower	mm	914	912	618	616
	inch	35 31/3	35 29/32	24 5/16	24 1/4

TO CHANGE THE DOOR OPENING FROM

LEFT TO RIGHT OR VICE VERSA

Open the door and unscrew the two screws holding the top front cover. The screws are accessible from beneath. Remove the top hinge pin and lift out the door. The lower pin for the refrigerator door should be shifted to the oppo- site side.

The door can then be remounted. But before the front decoration check that the door closes well and the latch works properly. If not, correct the door by loosen the two screws for the upper hinge against the front frame and adjust. Then tighten the screws and replace the front decoration.

Lower door

Unscrew the hinge pin from the lower doors upper hinge. Lift the door from the bottom hinge pin and move the pin to opposite side. Replace the door and correct the doors lock- ing position by means of the washers, if necessary adjust also the bottom hinge in the same way as the upper door.

AB-FPB 8717 cap 820 4552-00/7

RM2801, RM2501, RM2301 specifications

Dometic is a brand synonymous with innovation in the realm of mobile living, particularly in terms of refrigeration solutions. Among its product offerings, the Dometic RM2301, RM2501, and RM2801 stand out as highly efficient, reliable absorption refrigerators designed for those who seek comfort while on the road, camping, or in RVs. These models have gained popularity due to their blend of convenience, adaptability, and energy efficiency.

The Dometic RM2301 is a well-crafted absorption refrigerator that features a three-way power supply system. It can operate on propane, AC power, or DC power, allowing users to choose the best energy source available. With a generous capacity of 2.8 cu. ft., the RM2301 is ideal for short trips or weekend getaways. Its user-friendly controls and adjustable shelves offer flexibility in organizing food and beverages, making it a practical choice for any outdoor adventure. The unit also features a frost-free design, which minimizes maintenance and maximizes efficiency.

On the other hand, the Dometic RM2501 steps up the game with its larger capacity of 4.0 cu. ft., making it suitable for longer journeys. This model retains the three-way power capability, ensuring it can function wherever you are. The RM2501 also incorporates advanced insulation technology to maintain low temperatures even in warm environments, thereby enhancing food safety. Its sleek and stylish design fits seamlessly into any RV or mobile environment, offering aesthetic appeal alongside functionality.

The RM2801 further enhances the series with its 4.3 cu. ft. capacity, catering to even larger groups or longer trips. This model is equipped with a digital control panel, allowing for precise temperature adjustments for optimal food preservation. Like its counterparts, the RM2801 utilizes a unique rotary compressor that ensures quiet operation while maximizing cooling efficiency. Moreover, the automatic energy selection feature intelligently chooses the most economical power source, giving users peace of mind during their travels.

All three models are designed with durability in mind, featuring quality materials and construction that can withstand the rigors of travel. They also include safety features such as flame failure protection for the gas supply, ensuring that users can enjoy worry-free operation.

In summary, the Dometic RM2301, RM2501, and RM2801 are exemplary choices in the realm of absorption refrigerators, offering a blend of impressive capacity, versatile power options, and innovative technologies. These models are designed to meet the needs of travelers and outdoor enthusiasts alike, ensuring that food and beverages remain fresh and cool throughout the journey. Whether you're planning a road trip or a camping adventure, these refrigerators are a reliable companion, making them essential for anyone who values comfort and convenience on the go.

INSTRUCTIONS FOR MOUNTING THE DOOR PANEL