Special Hints, To Remove and Replace Refrigerator

SPECIAL HINTS

Note. Do not install the appliance directly on carpeting. Carpeting must be protected by a metal or wood panel beneath the appliance which extends at least full width and depth of the appliance.

The refngerator must be installed in a substantial enclosure and must be level. A spirit level is supplied with each refrigerator and by placing it in the freezer compartment one can level the refrigerator both ways front to back and side to side. When installing the refrigerator in the enclosure care should be taken to ensure a complete sealing between the front frame of the refrigerator and the top, sides and bottom of the enclosure. For this purpose a length of sealing strip is applied to rear surfaces of the front frame. A sealing strip should also be applied to the foremost floor of the enclosure as shown in fig 8. The sealing should provide a complete isolation of the appliance combustion system from the vehicle interior.

Be careful not to damage the sealing strip applied to the floor of the enclosure when the refrigerator is put in place.

In the front frame and in the base at the rear of the refrigerator there are holes for screws for fixing the refrigerator in the enclo- sure. See fig. 9.

Any space between counter or storage area and the top of the refrigerator greater than 1 1/2” should be blocked. The heat pro- duced at the rear of the refrigerator will otherwise become trap- ped in this space making the top of the refrigerator hot and reducing the efficiency of the refrigerator.

TO CHANGE THE DOOR, see last page

TO REMOVE AND REPLACE

THE REFRIGERATOR

Before working on the refrigerator make sure that 120 V A. C. and optional 12 V D.C. Leads are disconnected. Shut the gas valve. Unscrew the hexagon nut 11 and move the valve on the gas line out of the bracket. Check that the valve slips out of the clip connection with the switch shaft.

Loosen the screws fixing the refrigerator to the enclosure and remove the refrigerator.

When replacing the refrigerator make sure that the sealing strips are properly positioned. After reassembly the gas connection should be checked for leaks.

TEST OF THE GAS SAFETY SHUTOFF

The gas safety shutoff device must be tested after the refrigera- tor is placed in operation.

Refrigerator with piezo ignitor.

1.Start the refrigerator according to the instruction for gas operation with piezo igniter.

2.Check that the gas flame is lit. This can be observed through the reflector E.

3.Close the gas valve by turning the knob A back to position “OFF”.

4.Wait 1 minute.

5.Remove cover plate, see (46) in fig. 1, Open the gas valve by turning the knob A to position “GAS” whithout pushing the button C and D. Test that no gas comes through the jet, item 38. Use soapy water. Be careful not to damage the jet.

6.After test rinse the jet with water. Once more be careful not to damage the jet. Assamble the cover plate. Start the refrigera- tor by following the Instruction for gas operation with piezo igniter. Normal gas operation should now return. Operate for at least 5 minutes.

[‘

L- 1

c !

Fig.8

Fig.9

Refrigerator with automatic reigniter.

1.Start the refrigerator according to the instruction for gas operation with automatic reigniter.

2.Check that the gas flame is lit. The lamp E is out.

3.Close the gas valve by turning the knob A back to position “OFF”.

4.Wait 1 minute, disconnect 12 V D.C.

5.Remove cover plate, see (46) fig. 2 for RM2501 and (55) fig. 3 for RM2601/2801. Open the gas valve by turning knob A to position “GAS” without pushing the button C. The igniter shall not spark. Test that no gas comes through the jet, item 38. Use soapy water. Be careful not to damage the jet.

6.After test rinse the jet with water. Once more be careful not to damage the jet. Assamble the cover plate. Connect the 12 V D. C. again. Start the refrigerator by following the instruction for gas operation with automatic reigniter. Normal gas opera- tion should now return. Operate for at least 5 minutes.

RM2801, RM2501, RM2301 specifications

Dometic is a brand synonymous with innovation in the realm of mobile living, particularly in terms of refrigeration solutions. Among its product offerings, the Dometic RM2301, RM2501, and RM2801 stand out as highly efficient, reliable absorption refrigerators designed for those who seek comfort while on the road, camping, or in RVs. These models have gained popularity due to their blend of convenience, adaptability, and energy efficiency.

The Dometic RM2301 is a well-crafted absorption refrigerator that features a three-way power supply system. It can operate on propane, AC power, or DC power, allowing users to choose the best energy source available. With a generous capacity of 2.8 cu. ft., the RM2301 is ideal for short trips or weekend getaways. Its user-friendly controls and adjustable shelves offer flexibility in organizing food and beverages, making it a practical choice for any outdoor adventure. The unit also features a frost-free design, which minimizes maintenance and maximizes efficiency.

On the other hand, the Dometic RM2501 steps up the game with its larger capacity of 4.0 cu. ft., making it suitable for longer journeys. This model retains the three-way power capability, ensuring it can function wherever you are. The RM2501 also incorporates advanced insulation technology to maintain low temperatures even in warm environments, thereby enhancing food safety. Its sleek and stylish design fits seamlessly into any RV or mobile environment, offering aesthetic appeal alongside functionality.

The RM2801 further enhances the series with its 4.3 cu. ft. capacity, catering to even larger groups or longer trips. This model is equipped with a digital control panel, allowing for precise temperature adjustments for optimal food preservation. Like its counterparts, the RM2801 utilizes a unique rotary compressor that ensures quiet operation while maximizing cooling efficiency. Moreover, the automatic energy selection feature intelligently chooses the most economical power source, giving users peace of mind during their travels.

All three models are designed with durability in mind, featuring quality materials and construction that can withstand the rigors of travel. They also include safety features such as flame failure protection for the gas supply, ensuring that users can enjoy worry-free operation.

In summary, the Dometic RM2301, RM2501, and RM2801 are exemplary choices in the realm of absorption refrigerators, offering a blend of impressive capacity, versatile power options, and innovative technologies. These models are designed to meet the needs of travelers and outdoor enthusiasts alike, ensuring that food and beverages remain fresh and cool throughout the journey. Whether you're planning a road trip or a camping adventure, these refrigerators are a reliable companion, making them essential for anyone who values comfort and convenience on the go.