Charcoal Filters (on some models)
Safety
The charcoal filters are clipped inside of each reusable metal grease filter.
The charcoal filters cannot be cleaned. They must be replaced.
For 30″ hood models, order Kit no. WB02X10707.
For 36″ hood models, order Kit no. WB02X10708.
These kits can be ordered from your GE supplier.
If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that help remove smoke and odors.
The charcoal filters should be replaced when they are noticeably dirty or discolored (usually after 6 to 12 months, depending on hood usage).
NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher.
Instructions
Painted Surfaces (on some models)
To clean the hood surface, use a hot, | Do not use |
damp cloth with a mild detergent | abrasive cleaners. They will scratch |
suitable for painted surfaces. Use a | the surface. Wipe with a clean, hot, |
clean, hot, damp cloth to remove | damp cloth after using cleansers. |
soap. Dry with a dry, clean cloth. |
|
Stainless Steel Surfaces (on some models)
Operating Instructions
Do not use a
To clean the stainless steel surface, use a hot, damp cloth with a mild detergent suitable for stainless steel surfaces. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth.
If food soil remains, try a general kitchen cleaner, such as Fantastik®, Simple Green®, or Formula 409®.
For
Apply cleaner with a damp sponge. Use a clean, hot, damp cloth to remove cleaner. Dry with a dry, clean cloth. Always scrub lightly in the direction of the grain.
After cleaning, use a stainless steel polish, such as Stainless Steel Magic®, Revere Copper and Stainless Steel Cleaner®, or Wenol All Purpose Metal Polish®. Follow the product instructions for cleaning the stainless steel surface.
Installation Instructions
Hood Lights
This hood requires two bulbs (not included), maximum 50 watts.
Purchase and install PAR20, 50 W Maximum halogen bulbs.
When replacing a bulb, let it cool first. Make sure that power to the light has been turned off. Never allow a hot bulb to come into contact with water.
To change the light bulbs:
Grasp the bulb on the edges and unscrew it.
Replace with the same size bulb.
CAUTION:
■Do not touch the hood light bulbs when they are on. They may be hot enough to cause injury.
■The light bulbs operate at extremely high temperatures. If they shatter, the hot glass could cause personal injury.
Customer Service
5
