Whirlpool 7ED7FHGXKQ00, 7GS6SHAXKQ01 Water System Preparation, Connecting to Refrigerator Style

Page 9

Connecting to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

1.

Tube clamp

3.

Compression nut

2.

Copper tubing

4.

Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

3.Thread the provided nut onto the coupling on the end of the copper tubing. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

 

1

2

3

4

5

6

1.

Line to refrigerator

4.

Coupling (purchased)

2.

Nut (provided)

 

5.

Ferrule (purchased)

3.

Bulb

 

 

6.

Nut (purchased)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

3.Thread the provided nut onto the water valve as shown.

1

2

1.Bulb

2.Nut (provided)

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄ in. (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

7.Plug in refrigerator or reconnect power.

8.Flush the water system. See the “Water System Preparation” section.

NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.

Water System Preparation

(on some models)

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker by lifting up the wire shutoff arm as shown.

MAX

NORMAL

NOTES:

■If your model has a base grille filter system, make sure the base grille filter is properly installed and the cap is in the horizontal position.

■Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Side by Side Refrigerator Use & Care Guide2188765 Table of Contents Before you throw away your old refrigerator or freezer Refrigerator SafetyCleaning before use Installation InstructionsUnpacking Location RequirementsElectrical Requirements Water Supply RequirementsBase Grille Door Removal Door and Hinge Replacement Handle Removal optionalStyle Connecting to Water Line Door ClosingWater Supply Connection Water System Preparation Connecting to Refrigerator StyleRefrigerator USE Using the ControlsNormal Sounds Ensuring Proper Air CirculationWater and Ice Dispensers Water Filter Status Light Water Filtration SystemClean the Ice Storage Bin Using the Dispenser Without the Water FilterIce Maker and Storage Bin Flushing the Water System After Replacing FilterRefrigerator Shelves Adjustable Flip-up ShelfFlip-up Shelf Deli DrawerConvertible Vegetable/Meat Drawer Crisper and Covers Convertible Vegetable/Meat Drawer Temperature ControlCrisper Humidity Control Wine or Can/Bottle RackFreezer Shelf Freezer FeaturesDoor Rails Freezer Basket or BinCleaning Refrigerator CareChanging the Light Bulbs Vacation and Moving Care Power InterruptionsTroubleshooting Ice dispenser will not operate properly Off-taste, odor or gray color in the iceIce storage bin difficult to remove Water dispenser will not operate properlyIf you need replacement parts Temperature is too warmWater flow from the dispenser decreases noticeably Dispenser water is not cool enoughAccessories Water Filter CertificationsU.S.A Product Data Sheets Substance Reduction Min. Required %Application Guidelines/Water Supply Parameters Crosley Refrigerator Warranty Whirlpool Corporation will not pay for2188765

CS25AFXKT04, CS25AFXKT03, 7SS25AFXLQ00, 7GS6SHAXKT02, CS22AFXKB05 specifications

The Whirlpool 7GS6SHAXKQ01, 7ED7FHGXKQ01, 7GS6SHAXKB01, 7GS6SHAXKT00, and 7GS6SHAXKB02 are advanced kitchen appliances designed to meet the needs of modern households. With a focus on efficiency, capacity, and innovative technologies, these models offer a range of features that make cooking and food storage more convenient.

The Whirlpool 7GS series refrigerator models focus on maximizing storage space while maintaining energy efficiency. They come equipped with advanced cooling technologies that ensure even distribution of cold air, preserving the freshness of foods for a longer period. The adaptive cooling feature intelligently modifies temperature settings based on the contents of the refrigerator, helping to minimize energy consumption without sacrificing performance.

In terms of organization, these refrigerators include customizable shelving and adjustable bins, allowing users to rearrange their storage space according to their needs. This flexibility is particularly beneficial for accommodating larger items or when reorganizing after grocery trips. Additionally, the humidity-controlled crisper drawers help keep fruits and vegetables fresh by preserving moisture and controlling airflow.

The Whirlpool 7ED7FHGXKQ01 model stands out with its smart technology integration, offering Wi-Fi connectivity that allows users to control the refrigerator remotely through a mobile app. This means you can monitor temperatures, receive alerts for temperature fluctuations, and even create shopping lists based on what’s inside your fridge—all from your smartphone.

Another highlight is the advanced filtration system present in these models, which ensures that the water and ice produced are free from impurities. This feature not only guarantees better taste but also improves the overall health aspects of the water consumed by families.

Energy Star certified, these appliances are designed to reduce energy consumption, making them an eco-friendly choice for environmentally conscious consumers. The efficient compressors and insulation enhance their energy-saving capabilities, leading to lower utility bills.

With their sleek design, these models blend seamlessly into any kitchen decor, enhancing both aesthetics and functionality. The exterior features easy-to-clean surfaces and fingerprint-resistant materials, ensuring that your refrigerator remains spotless and appealing even with everyday use.

In conclusion, the Whirlpool 7GS6SHAXKQ01, 7ED7FHGXKQ01, 7GS6SHAXKB01, 7GS6SHAXKT00, and 7GS6SHAXKB02 models represent a significant advancement in home appliances. Their combination of innovative technology, efficient energy usage, and thoughtful design makes them an excellent choice for anyone looking to upgrade their kitchen with reliable and stylish solutions.
Top Page Image Contents