Whirlpool ET12AK Removing and adjusting the freezer shelf, Adjusting the refrigerator, Shelves

Moving the meat pan and cover...

The meat pan and cover can be removed for cleaning and moved to another shelf, if desired. Remove the meat pan first.

Removing:

I, Slide meat pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.To remove cover, lift it straight up and out

Replacing:

I, To replace cover, frt notches In cover sides over center shelf support.

2.Lower cover Into place.

3.To replace pan, fit edges of pan into supports on cover.

4.Slide meat pan into place.

Changing the light bulb.. .

WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect

the electricity leading to the re- frigerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.

1.Reach behind control console to find bulb.

2.Remove bulb.

3.Replace with a 40.watt appliance bulb.

Removing crisper and crisper cover.. .

Removing Crisper:

l Slide crisper straight out.

Removing Cover:

1.Lift back, then slide to the rear until the front con be lifted.

2.Lift cover up and out.

Replacing Cover:

1.Slide the front cover tabs into the back of the front supports on the refrigerator wall.

2.Lower back into place.

Removing and adjusting the freezer shelf...

To remove shelf:

1 Lift front slightly.

2. L1f-backt off supports

3 Replace tn reverse order.

To adjust shelf:

1. Remove shelf.

2 Remove supports by slrdrng upwards

3.Replace supports on desired level

4.Replace shelf.

Adjusting the refrigerator

I, First, remove food from shelf.

2.Slide shelf straight out to stop.

3.Lift front.

4.Slide the rest of the way out.

shelves...

Guide Stop-

Shelf Stop

Replacing Shelf:

I. Fit back of shelf on top of guides with wire stops

on the bottom of guides.	Shelf Guide
2. Lift front, slide shelf in until it clears guide stops.

6