Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold botttes, milk and other heavy food items.
To remove glass shelves:
1.Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1.Guide the rear hooks inio the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
Removing and adjusting the freezer shelf...
To remove the shelf:
1.Lift front slightly.
2.Lift back off supports.
3.Replace in reverse order.
To adjust the shelf:
1.Remove shelf.
2.Remove supports by sliding upwards.
3. | Replace | supports on desired level. | SHELFSUPPORT |
4. | Replace | shelf. |
|
Removing crispers and crisper cover...
PULL OUT 10 STOP, LIFT THE FRONT | To remove the crispers: |
AND PULL AGAIN | 1. Slide crisper straight out to stop, liff front, then |
| |
| slide the rest of the way out. |
| 2. Replace in the reverse order. |
REMOVE THE
LIFT THEFRAME THENTHEBACK
To remove the cover:
1.Push up glass insert from bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift out cover frame by pulling up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back of corner into notch supports on walls of refrigerator, then lower into place.
3.Slide back of glass insert into place, then lower front.
GLASS IS HEAVY. BE CAREFUL.
Moving the meat pan and cover...
PULL OUT TO STOP. LIFT THE
FRONT AND PULL AGAIN.
AVY.
To remove the meat pan:
1.Slide the meat pan out to stop.
2.Lift the front.
%3.Slide the pan the rest of the way out. 4. Replace in reverse order.
To remove the cover:
1.Tilt front of cover up, lift at back, and pull straight
2.Replace in reverse order.
6