Other Operating Instructions Continued
MAGIC CLEAN | Bask& |
lint filter | interior |
MAGICCLEAN”lint filter
(model LA8400XW)
The lint filter at the bottom of the washer basket cleans itself. During agl- tation, wash and rinse water pass over the filter, separating lint from water. The collected particles of lint are then continuously spun away from the filter and washed out of the system at the end of the wash cycle.
If your washer drains into a tub, remove any lint collected in the tub or strainer.
Manual clean lint filter
Manual clean lint filter
(model LA8100XW)
Clean the filter at the bottom of the agitator after every load for the best filtering results.
To clean:
1.Loftoff the agitator barrel
2.Wash or wipe the filler clean In the bottom of the agrtator barrel. The filter s not removable.
3.Replace the agrtator barrel and snap II Into place.
IfYouNeedServiceOrAssistance
We sugpestvou 1follow
thesef -siepS:’
1.Before calling for assistance...
Performance problems often result from little things you can find and fix yourself without tools of any kind.
If your washer does not fill:
l Is the power supply cord plugged into a live circuit with the proper voltage?
. Are both water faucets open?
l Have you checked your home’s main fuses or circuit breaker box7
l Are the water supply hoses kinked?
lIs the Cycle Control Knob set and pulled out?
If your washer does not spin:
lIs the lid closed?
l Is the power supply cord plugged into a live circuit with the proper voltage?
l Have you checked your home’s main fuses or circuit breaker box?
If your washer stops during a cycle:
l Remember, the washer pauses briefly at different times in each cycle. These pauses are normal.
If your washer fills and drains without running:
l Make sure that the Cycle Control Knob is pointing to a number in the cycle.
Make sure the drain hose is higher than the water level in the washer. If it isn’t:
l The washer may seem to be draining during wash and rinse cycles.
l Water can siphon out.
(See Installation Instructions.)
10