Whirlpool GB2SHKXMQ00 ChangingtheLightBulb, PowerInterruptions, Changing the Freezer Light Bulb

Page 14

Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.

To help remove odors, you can wash interior walls with a mixture of warm water and baking soda (2 tbs. to 1 qt. [26 g to 0.95 L] of water).

4.Determine whether your refrigerator exterior is painted metal, brushed aluminum or stainless steel and choose the appropriate cleaning method.

Painted metal: Wash exteriors with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners designed for stainless steel. Dry thoroughly with a soft cloth. For additional protection against damage to painted metal exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth. Do not wax plastic parts.

Brushed aluminum: Wash with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners designed for stainless steel. Dry thoroughly with a soft cloth.

Stainless steel finish: Wash with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.

To keep your stainless steel refrigerator looking like new and to remove minor scuffs or marks, it is suggested that you use the manufacturer’s approved Stainless Steel Cleaner & Polish.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner & Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If accidental contact does occur, clean plastic part with a sponge and mild detergent in warm water. Dry thoroughly with a soft cloth. To order the cleaner, see the “Accessories” section.

5.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

Remove the base grille. See “Base Grille” graphic or “Base Grille” section.

Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

Replace the base grille when finished.

6.Plug in refrigerator or reconnect power.

ChangingtheLightBulb

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.

Changing the Refrigerator Light Bulb

1.Unplug the refrigerator or disconnect power.

2.Slide shield toward back of compartment to release from light assembly.

3.Replace burned-out bulb(s) with an appliance light bulb no greater than 40 watts.

4.Replace light bulb cover by inserting tabs on light shield into liner holes on each side of light assembly. Slide shield toward front of unit until it locks into place.

NOTE: Do not force shield beyond locking point; doing so may damage light shield.

5.Plug in refrigerator or reconnect power.

Changing the Freezer Light Bulb

1.Unplug refrigerator or disconnect power.

NOTE: May need to remove upper freezer shelf or basket to access light assembly.

2.Squeeze and pull rear of light shield cover toward you to release tabs and pull down.

3.Replace burned-out bulb with appliance bulb no greater than 40 watts.

4.Insert front tabs of light cover into liner and snap back portion over light assembly.

5.Plug in refrigerator or reconnect power.

PowerInterruptions

If the power will be out for 24 hours or less, keep the door or doors closed (depending on your model) to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the following:

Remove all frozen food and store it in a frozen food locker.

Place 2 lbs. (907 g) of dry ice in the freezer for every cubic foot (28 L) of freezer space. This will keep the food frozen for 2 to 4 days.

If neither a food locker nor dry ice is available, consume or can perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If you see that food contains ice crystals, it may be refrozen, although the quality and flavor may be affected. If the condition of the food is poor, dispose of it.

14

Image 14
Contents BOTTOM-MOUNT Refrigerator Table of Contents Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerUnpacktheRefrigerator Installation InstructionsClean Before Using LocationRequirementsConnecttheWaterSupply Electrical RequirementsWater Supply Requirements BaseGrille RefrigeratorDoorsReplace Doors and Hinges Remove Doors and HingesReverse Doors optional on some models Final StepsDoor Removal Replacement NormalSounds AdjusttheDoorsRefrigerator USE EnsuringProperAirCirculationIceMaker UsingtheControlsAdjusting Controls Turning the Ice Maker On/Off MeatDrawerandCover Refrigerator Features RefrigeratorShelves Freezer Features Door Features Refrigerator CareChanging the Refrigerator Light Bulb PowerInterruptionsChangingtheLightBulb Changing the Freezer Light BulbTroubleshooting VacationandMovingCareIce maker is not producing ice on some models Temperature is too warmRefrigerator seems to make too much noise Ice maker is producing too little ice on some modelsInCanada Assistance or ServiceAccessories TheU.S.ACall Whirlpool Refrigerator WarrantyWhirlpool Corporation will not pay for Sécurité DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurDéballagedu réfrigérateur Instructions D’INSTALLATIONEmplacementd’installation Enlèvement des matériaux d’emballageRaccordementdelacanalisation deau SpécificationsélectriquesSpécifications del’alimentationen eau Pour enlever la grille de la base GrilledelabaseRaccordement au réfrigérateur Pour replacer la grille de la basePortes du réfrigérateur Installation et enlèvement des poignées de porteRéinstallation Portes et charnières Enlèvement des portes et des charnièresÉtapes finales Inspecter tous les trous. Vérifier que tous les bouchonsFermeture des portes AjustementdesportesSonsnormaux Utilisation DU Réfrigérateur Utilisationdes commandesAjustement des réglages de commande Réglage moyenTablettes duréfrigérateur Caractéristiques DU RéfrigérateurMachineàglaçons Réglagedel’humiditédans lesbacs àlégumes Bac àlégumes etcouvercleTiroiràviandeetcouvercle Congélateur LA Porte Entretien DU RéfrigérateurRemplacement de lampoule du compartiment de congélation Remplacementdel’ampouled’éclairageRemplacement de lampoule du compartiment de réfrigération Pannes decourantDéménagement DépannageEntretien avantlesvacancesou lors ’un déménagement Les ampoules n’éclairent pasLa cloison entre les deux sections est tiède Le moteur semble fonctionner excessivementLe réfrigérateur semble faire trop de bruit La température est trop tièdeAssistance OU Service AccessoiresGarantie DU Réfrigérateur Whirlpool Whirlpool Corporation ne paiera pas pour12828108/2300234 Whirlpool Corporation All rights reserved