Whirlpool ET18HD, ET20HD, ET20DM, ET18DK Adjusting the lateral-adjust shelf, To remove the shelf

Page 10

Adjusting the lateral-adjust shelf

To slide shelf side-teslde:

1.Lii slightly on shelf front.

2.Slide to desired location.

3.Lower shelf front to level position.

NOTE: You do not have to remove small items from the shelf before moving it side-to- side. You may need to remove larger items.

Lii front slightly.

Then rlide to new location.

To remove the shelf:

1.Remove all items from the shelf.

2.Hold hack of shelf with one hand.

3.Lii front of shelf to 45” angle.

4.Lower shelf slightly to release shelf from upper channel of track. Then pull sheff straight out.

NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.

To remove shelf track:

1.Lii both sides of track slightly.

2.Pull track straight out.

To replace shelf track:

1.Guide track hooks into the shelf support slots on the hack wall of the cabinet.

NOTE: Make sure all three track hooks are in slots and that the slots are parallel to each other.

2.Push track backward and down.

3.Check that track is completely seated in the shelf supports.

Hold with both hands and lift front to 45” angle.

Hold both sides and lift up and out.

Shelf

Make-support sure all

3 sets of hooks ars in support slots.

10

Image 10

Contents Cell us with questions or commenb Thank you for buying a WhirlpooP appliance Your safety is important to usSerial Number Important Safety Instructions Help us help youAhelf Parts And FeaturesControl panel InrideCleaning it Before Using Your RefrigeratorPlugging it Leveling it Installing it properlyScrewdriver Temperature controls Using Your RefrigeratorSetting the controls Reversing the door swing Removing011 Changing the control SettingsEx-mmYolsnREcalRa Exterior moisture controlRemoving the tall-bottle retainer Adjusting the door binsAdjusting the bin/shelf glides Grasp glide Slide glide along bin/trackAdjusting the lateral-adjust shelf To remove the shelfUsing the egg bin Adjusting the cantileverRefrigerator shelves Crisper cover Removing the meat drawer and coverRemoving the crispers Lift front of cover frame, then the backRemoving the freezer shelf Adjusting the crisper humidity controlUsing the ice cube trays Raising the ice compartment doorSolving common ice maker problems Using the automatic iceFactory-installed on some models MakerRemoving the base grille Changing the light bulbsTo remove the grille Cpen refrigerator door Understanding the sounds you may hear Reversing the door swingSaving energy Caring For Your Refrigerator Cleaning your refrigeratorHOW to Clean Part What to USEVacation and moving care Short vacationsMoving Power interruptionsLong vacations QuestionsFood Storage Guide Storing fresh foodPackaging Storing frozen foodFreezing Before calling for assistance If You Need Assistance Or ServiceCheck the Following Lf you need assistance If you need serviceIf you are not satisfied with How the problem was solved If you need FSP replace- ment partsFrom Date of Purchase WHIRLPOOL@ Refrigerator WarrantyLength of Warranty Full ONE-YEAR Warranty Whirlpool will PAY for