Whirlpool ET18DK, ET20HD, ET20DM Adjusting the cantilever, Refrigerator shelves, Using the egg bin

Page 11

To reinstall shelf:

1.Hold shelf at front and back.

2.Tilt front of shelf up to a 45” angle to track.

3.Insert both rear shelf slides into upper channel of track.

4.Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.

Adjusting the cantilever

Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass shelves:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lift back of shelf.

4.Pull shelf straight out.

To replace glass shelves:

1.Guide the rear shelf hooks into the slots in the shelf sup@s on cabinet wall.

2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.

Upper channel

slides into upper channel

of track

refrigerator shelves

Glass shelves are

heavy. Be careful.

Using the egg bin

The egg bin has three pieces - the lid, the egg carrier, and the bin. Use the egg bin to hold one, two or three dozen eggs.

To hold one dozen eggs:

Place a dozen eggs into the egg carrier. Then place the egg carrier into the bin and cover with the lid.

To hold two dozen eggs:

Phce two dozen eggs loose in the bin and cover them with the lid. Use the carrier to transport eggs between the bin and your cooking area.

To hold three dozen eggs:

 

Place two dozen eggs loose in the bin. Invert

 

the lii and place it on the bin. Place a dozen

 

eggs, in the carton, on top of the lid. Use the

 

carrier to transport eggs between the bin and

11

your cooking area.

Image 11
Contents Cell us with questions or commenb Serial Number Your safety is important to usThank you for buying a WhirlpooP appliance Help us help you Important Safety InstructionsInride Parts And FeaturesControl panel AhelfPlugging it Before Using Your RefrigeratorCleaning it Screwdriver Installing it properlyLeveling it Reversing the door swing Removing Using Your RefrigeratorSetting the controls Temperature controlsExterior moisture control SettingsEx-mmYolsnREcalRa 011 Changing the controlGrasp glide Slide glide along bin/track Adjusting the door binsAdjusting the bin/shelf glides Removing the tall-bottle retainerTo remove the shelf Adjusting the lateral-adjust shelfRefrigerator shelves Adjusting the cantileverUsing the egg bin Lift front of cover frame, then the back Removing the meat drawer and coverRemoving the crispers Crisper coverRaising the ice compartment door Adjusting the crisper humidity controlUsing the ice cube trays Removing the freezer shelfMaker Using the automatic iceFactory-installed on some models Solving common ice maker problemsTo remove the grille Cpen refrigerator door Changing the light bulbsRemoving the base grille Saving energy Reversing the door swingUnderstanding the sounds you may hear Part What to USE Cleaning your refrigeratorHOW to Clean Caring For Your RefrigeratorShort vacations Vacation and moving careQuestions Power interruptionsLong vacations MovingStoring fresh food Food Storage GuideFreezing Storing frozen foodPackaging Check the Following If You Need Assistance Or ServiceBefore calling for assistance If you need FSP replace- ment parts If you need serviceIf you are not satisfied with How the problem was solved Lf you need assistanceWhirlpool will PAY for WHIRLPOOL@ Refrigerator WarrantyLength of Warranty Full ONE-YEAR Warranty From Date of Purchase