Install | properly.. | . | Remove sales labels.. . |
| |
|
|
| Remove the Consumer Buy Guide label and other | ||
|
|
| inside labels before using the refrigerator. Any glue | ||
|
|
| left can be taken off with rubbing alcohol. |
| |
|
|
| Do not remove | the Tech Sheet fastened | under |
|
|
| the refrigerator | at the front. |
|
Clean it.. .
1.Allow 1%inch (1.3 cm] between overhead cabinets and the refrigerator top.
2.Allow ‘~2inch (1.3 cm) clearance against cabinets on each side for ease of installation.
3.If the refrigerator is to be against a wall, you might want to leave enough space so the door can be opened wider.
Level refrigerator-freezer.. . Levelingscrew
Clean your refrigerator before using it. See clean- ing instructions on page 8,
Plug it in...
Right to Raise;
Left to Lower
I. Remove base grille [see page 8).
2.To raise front, turn each screw to the right.
3.To lower front, turn each screw to the left.
4.Check with level.
Refrigerator
Power Cord
RECOMMENDED GROUNDING METHOD
A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided.
Do not use an extension cord. Use a receptacle which cannot be turned off with a switch or pull chain. See individual electrical requirements and
grounding instruction sheet in your literature package.