Using your refrigerator
,Setting the control ...
The control | for | the | refrigerator | temperature | IS or’ | ||
the | refrigerator | When | the | refrigerator | IS plugged | or | |
and | the run | swt?ch | IS moved | to RUN |
| ||
1 | 2 |
3 | |
t | 4’ |
3c | |
0 | |
5J |
|
%0 | 5 |
\ |
|
l Set ‘he THERMOSTAT | CON:IIOL to 3 |
The freezer tray...
The freezer tray IS located under the freezer com- partment
The damper at the rear of the freezer tray helps
control the refrigerator temperature for warm weather operatron. The damper can be adjusted for proper cooling and defrosting of the refrigerator
To adjust the damper:
1 Pull out the freezer tray
2 L1r7out the damper from the rear of the tray 3 Slide damper tnto the desired positron
NOTE: “B, C, D” positions provide fine cooling adjustments to best meet your cooling needs in warm weather.
Changing the light bulb...
WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect
the electricity leading to the re- frigerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.
1 Reach behind control console to find bulb
2 Remove bulb.
3 Replace with a 40.watt (maxrmum) appliance bulb.
Give the refrigerator time to cool down com- pletely before adding food. (This map take sev
erol hours )
This setting should be about right for normal
household refrigerator usage.
The control WIII be set about right when milk or juice IS as cold as you Ike In hot weather or If the door IS opened often, turn the control to a hrgher number to
keep the temperature you lrke If the mrlk orjulce ~stoo
cold or refrtgerator items start to freeze, turn the con trol to a lower number or adjust the freezer tray
damper Wart 24 hours after an adjustment IS mode before further change IS mode to the controls
tooting and defrosting
u
E - [FULL Open]
weather setting.