Whirlpool W10224664A installation instructions Temperature and Moisture, Iceand Water

Page 10

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Remove the PackagingElectrical Requirements Clean Before UsingLocationRequirements Water Supply RequirementsConnect the Water Supply On somemodelsRemove Doors and Hinges Complete the InstallationRefrigerator Doors Replace Doors and HingesAdjust theDoors StyleRefrigerator USE Using the ControlsOnsomemodels- Accessory Ice MakerRefrigerator Care CleaningChanging the Light Bulbs Troubleshooting Refrigerator OperationTemperature and Moisture Iceand WaterThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSeguridad DEL Refrigerador EL Usuario DEL RefrigeradorAntes de tirar su refrigerador viejo o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Quite los materiales de empaqueRequisitos eléctricos Requisitos de ubicaciónMétodo de conexión a tierra recomendado Conexión del suministro deagua Requisitos del suministro de aguaEn algunos modelos Estilo Conexión al refrigeradorCómo terminar la instalación Cómo quitar las puertas y las bisagras Puertas del refrigeradorCómo volver a poner las puertas y las bisagras en su lugar Pasos finalesAjuste las puertas EstiloFábrica de hielo Uso de los controlesEn algunos modelos- accesorio Recuerde LimpiezaCómo cambiar los focos Para limpiar su refrigeradorSolución DE Problemas Funcionamiento del refrigeradorTemperatura y humedad Hielo y aguaExclusiones DE LA Garantía Whirlpool CorporationGarantía Limitada Esta garantía limitada no cubreSécurité DU Réfrigérateur RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions D’INSTALLATIONDéballage duréfrigérateur Enlèvement des matériaux d’emballageMéthode recommandée de mise à la terre Exigences d’emplacementSpécifications électriques Raccordement de la canalisation d’eau Spécifications de l’alimentationen eauSurcertainsmodèles Achever l’installation Raccordement au réfrigérateurDémontage Portes et charnières Réinstallation Portes et charnièresPortes du réfrigérateur Étapes finalesDépose et réinstallation des portes Ajustement des portesUtilisation DU Réfrigérateur Utilisation des commandesSur certainsmodèles- accessoire Machine à glaçonsNettoyage Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur Lumière du réfrigérateurLe réfrigérateur ne fonctionne pas DépannageFonctionnement duréfrigérateur Le moteur semble trop tournerGlaçons et eau Température et humiditéÉléments Exclus DE LA Garantie CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10224664A Whirlpool Corporation 11/08 All rights reserved

W10224664A specifications

The Whirlpool W10224664A is a premium quality replacement refrigerator water filter that is designed to ensure you have access to clean and safe drinking water right from your refrigerator. Known for its effectiveness and reliability, this water filter is compatible with various Whirlpool refrigerator models and easily replaces the old filters to maintain the high standards of water filtration.

One of the main features of the W10224664A filter is its advanced filtration technology. It employs a multi-stage filtration system that reduces contaminants and impurities commonly found in tap water, including chlorine taste and odor, lead, cysts, and other harmful substances. This ensures that the water and ice dispensed from your refrigerator not only tastes better but is also healthier for you and your family.

The filter has a capacity of filtering up to 200 gallons of water, providing ample supply for your household needs. It is recommended to change the filter every six months to ensure optimal performance. The installation process is straightforward and does not require any tools, allowing homeowners to replace the filter quickly and efficiently. The easy twist-and-lock mechanism provides extra convenience and confidence that the filter is securely in place.

Another notable characteristic of the Whirlpool W10224664A is its NSF certification. This means that the filter has been tested and certified by the National Sanitation Foundation to meet strict standards for safety and performance. This certification assures consumers that they are using a product that has been rigorously evaluated for its effectiveness in reducing contaminants.

In terms of compatibility, the W10224664A fits several Whirlpool models, making it a versatile option for many users. It is also compatible with other brands and models, which broadens its appeal and usability in various households. Additionally, the filter is designed to last, so you can trust it to deliver quality filtration over its lifespan.

In summary, the Whirlpool W10224664A water filter combines advanced filtration technology with ease of use and compatibility, making it a great investment for anyone looking to improve their drinking water quality. Its performance, reliability, and NSF certification make it a trusted choice for families aiming to maintain a healthy lifestyle. Regular maintenance and timely replacement will ensure your water remains fresh and safe for years to come.
Top Page Image Contents