Troubleshooting, Refrigerator Operation

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Power cord unplugged? Plug into a grounded 3 prong outlet.

■Is outlet working? Plug in a lamp to see if the outlet is working.

■Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■Pulsating - fans/compressor adjusting to optimize performance.

■Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

■Popping - contraction/expansion of inside walls, especially during initial cool-down.

■Water running/dripping/sizzling - may be heard when ice melts during defrosting and water runs into the drain pan. Water dripping onto the piping can be heard for a few minutes after the refrigerator stops running.

■Soft murmur/buzzing - the fan and air moving.

■Beeping - Door Ajar alarm (on some models) - If the door(s) are left open for more than 2 minutes, the Door Ajar alarm will start beeping and will continue to beep until the door(s) are closed.

The door will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back in the correct position.

■Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

W10224664A specifications

The Whirlpool W10224664A is a premium quality replacement refrigerator water filter that is designed to ensure you have access to clean and safe drinking water right from your refrigerator. Known for its effectiveness and reliability, this water filter is compatible with various Whirlpool refrigerator models and easily replaces the old filters to maintain the high standards of water filtration.

One of the main features of the W10224664A filter is its advanced filtration technology. It employs a multi-stage filtration system that reduces contaminants and impurities commonly found in tap water, including chlorine taste and odor, lead, cysts, and other harmful substances. This ensures that the water and ice dispensed from your refrigerator not only tastes better but is also healthier for you and your family.

The filter has a capacity of filtering up to 200 gallons of water, providing ample supply for your household needs. It is recommended to change the filter every six months to ensure optimal performance. The installation process is straightforward and does not require any tools, allowing homeowners to replace the filter quickly and efficiently. The easy twist-and-lock mechanism provides extra convenience and confidence that the filter is securely in place.

Another notable characteristic of the Whirlpool W10224664A is its NSF certification. This means that the filter has been tested and certified by the National Sanitation Foundation to meet strict standards for safety and performance. This certification assures consumers that they are using a product that has been rigorously evaluated for its effectiveness in reducing contaminants.

In terms of compatibility, the W10224664A fits several Whirlpool models, making it a versatile option for many users. It is also compatible with other brands and models, which broadens its appeal and usability in various households. Additionally, the filter is designed to last, so you can trust it to deliver quality filtration over its lifespan.

In summary, the Whirlpool W10224664A water filter combines advanced filtration technology with ease of use and compatibility, making it a great investment for anyone looking to improve their drinking water quality. Its performance, reliability, and NSF certification make it a trusted choice for families aiming to maintain a healthy lifestyle. Regular maintenance and timely replacement will ensure your water remains fresh and safe for years to come.