Whirlpool W10343810A installation instructions Ice Maker, Water Filtration System

Page 14

Ice Maker

(on somemodels)

IMPORTANT: For models with a water filter, after connecting the refrigerator to a water source or replacing the water filter, fill and discard three full containers of ice to prepare the water filter for use.

Turning the Ice Maker On/Off

To turn the ice maker ON, simply lower the wire shutoff arm.

To manually turn the ice maker OFF, lift the wire shutoff arm to the OFF (arm up) position and listen for the click.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

Ice Storage Bin

1.Wash the ice storage bin with mild soap and warm water.

2.Slide the ice storage bin under the ice maker, and push it toward the back as far as it will go.

3.Lower the arm on the ice maker to the “on” position.

NOTE: It usually takes approximately 24 hours for the ice maker to begin producing ice. You may notice the ice has an “off-taste.” If so, discard the first three batches of ice produced. After that the “off-taste” should be gone.

Ice Production Rate

The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period. Allow 3 days to completely fill the ice container.

To increase ice production, lower the freezer and refrigerator temperature. See “Using the Control(s).” Wait 24 hours between adjustments.

Remember

The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice storage bin and the dispenser mechanism.

Do not store anything on top of or in the ice maker or ice storage bin.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Water Filter Status Light

The water filter status light will help you know when to change your water filter.

When it is time to order a replacement water filter, the water filter icon LED will light up whenever the refrigerator door is open.

When it is time to replace the water filter, the water filter icon LED will light up and flash whenever the refrigerator door is open.

The disposable water filter should be replaced at least every

6 months, or sooner depending on your water quality and usage.

After changing the water filter, reset the status. Press and hold the FILTERS RESET button for 3 seconds. When the system is reset, the water filter icon LED will turn off.

Changing the Water Filter

1.Locate the water filter in the top-right corner of the refrigerator compartment.

2.Lift open the filter cover door. The filter will be released and then eject as the door is opened.

3.When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling may occur. Use a towel to wipe up any spills.

4.Take the new filter out of its packaging and remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.

5.With the arrow pointing up, align the new filter with the filter housing and slide it into place. The filter cover door will automatically begin to close as the new filter is inserted.

6.Close the filter cover door completely in order to snap the filter into place. You may need to press hard.

7.Make and discard three full containers of ice to prepare the water filter for use, before using the ice.

14

Image 14
Contents Refrigerator Safety Refrigerator User InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Electrical Requirements Clean Before UsingLocationRequirements Recommended Grounding MethodReverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededCabinet Refrigerator DoorsStyle 1-Standard Doors Freezer DoorPlastic Handles Extend from the Door on some models Cabinet Refrigerator DoorStyle 2-Contour Doors DoorsDoor Removal Replacement Style 1-Standard DoorDoor Removal Door Swing Reversal optional Replacement Style 2-Contour DoorStyle 1 Install Manual Air Filter Status Indicator Adjust the DoorsInstall Air Filter CONDITION/REASON Adjustment Using the ControlsFilters Reset on some models Refrigerator USEMeat Drawer Refrigerator FeaturesRefrigerator Shelves CrisperGlass Freezer Shelf Freezer FeaturesWire Freezer Shelf Style 1 Plastic CoverDoor Bins Door FeaturesDoor Rails Utility Compartment and Can CaddyIce Maker Water Filtration SystemRefrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbsRefrigerator Operation TroubleshootingTemperature and Moisture Accessories Iceand WaterPerformance Data Sheet Water Filtration SystemThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationDéballage duréfrigérateur Nettoyage avant l’utilisationSpécifications électriques Exigences demplacementMéthode recommandée de mise à la terre Spécifications del’alimentationen eauPression de leau Raccordement de la canalisation deauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauStyle 1 Portes standard Achever l’installation Démontage des portes et charnièresPortes du réfrigérateur Inversion des portes facultatifPorte du réfrigérateur CaissePorte du congélateur Style 2 Portes contourRemarques Réinstallation Portes et charnièresPortes Étapes finalesDémontage et réinstallation De la porte Style 1-Porte standardStyle 2 Porte contour Poignée en plastiqueInstallationdu filtre à air Ajustement desportesCONDITION/RAISON Ajustement Utilisation des commandesUtilisation DU Réfrigérateur Tiroir à viande RéfrigérateurTablettes du réfrigérateur Tablette métallique ducongélateur Caractéristiques DU CongélateurBac à légumes Style 1 Couvercle en plastiqueTringles dans la porte LA PorteTablette enverre du congélateur Balconnets de porteMachine à glaçons Système defiltrationde leauEntretien DU Réfrigérateur Remplacement des ampoules d’éclairageStyle 1 Commande électronique NettoyageLe réfrigérateur ne fonctionne pas DépannageFonctionnement du réfrigérateur Le moteur semble trop tournerGlaçons et eau AccessoiresTempérature et humidité Feuille DE Données SUR LA Performance Système de filtration d’eauÉléments Exclus DE LA Garantie Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10343810A SP PN W10359300A

W10343810A specifications

The Whirlpool W10343810A is a highly efficient and versatile appliance that reflects the brand's commitment to innovation and quality. As part of Whirlpool's extensive range of home products, this model is specifically designed to enhance your laundry experience, combining advanced technology and user-friendly features for optimal performance.

One of the standout features of the W10343810A is its capacity. With ample space to handle large loads, this model allows users to do fewer laundry batches, saving both time and energy. This is particularly beneficial for families or those who frequently wash bulky items like bedding and towels. The drum is designed for optimal airflow, promoting even drying and minimizing wrinkles, which results in fresh, ready-to-wear clothes straight from the dryer.

The W10343810A is equipped with advanced sensor drying technology. This intelligent feature detects moisture levels in the clothes and automatically adjusts drying time for maximum efficiency. This not only conserves energy but also protects garments from over-drying, ensuring longevity and maintaining fabric integrity. With a variety of drying cycles available, users can select the perfect setting for different fabric types, providing versatility for a range of laundry needs.

Whirlpool has also integrated smart features into the W10343810A, allowing for seamless connectivity. Users can monitor and control their laundry remotely through a mobile app, which makes it easy to keep track of drying cycles and receive alerts when laundry is done. This connectivity offers added convenience for busy households, empowering users to multitask while ensuring their laundry is taken care of.

In terms of design, the W10343810A boasts a modern and sleek look, making it an attractive addition to any laundry room. Its user-friendly interface includes a digital display and intuitive controls, making operation straightforward and hassle-free. The durable construction guarantees reliability, while the easy-to-clean lint filter ensures maintenance is minimal.

Overall, the Whirlpool W10343810A stands out for its combination of capacity, advanced technology, energy efficiency, and user-centric design. It exemplifies Whirlpool's dedication to providing high-quality home appliances that meet the needs of today’s consumers. Whether you’re tackling everyday laundry or special items, the W10343810A is designed to deliver exceptional results.