Whirlpool W10343810A installation instructions Adjust the Doors, Install Air Filter

Page 9

Adjust the Doors

Door Closing

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below.

NOTE: 21 cu ft models have an additional leveling leg located in front of the right-hand roller assembly. After adjusting the refrigerator to the desired tilt, turn this leveling leg until it is firmly against the floor.

21 cu ft Models only

A

A. Leveling leg

IMPORTANT:

To comply with American Disabilities Act (ADA) guidelines, fully retract the rollers into the cabinet to lower the refrigerator.

1.Remove the base grille. See the Base Grille graphic in “Refrigerator Doors.” The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side.

2.Use a socket driver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers which makes it easier to adjust.

3.Open both doors again to make sure they close as easily as you like and that they stay closed. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns.

NOTE: To keep the refrigerator level, you should turn both leveling screws the same amount.

4.Replace the base grille.

Align Doors

If the space between your doors looks uneven, you can adjust it using the instructions below:

1.Pry off the top hinge cover.

2.Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

3.Have someone hold the door in place or put a spacer between the doors while you tighten the top hinge screws.

4.Replace the top hinge cover.

Install Air Filter

(on somemodels)

On some models, your refrigerator's accessory packet includes an air filter, which must be installed prior to use. On some models, the air filter is already installed at the factory.

The air filter reduces the buildup of odors. This helps to maintain a cleaner environment inside the refrigerator.

Installing the Air Filter (on some models)

The filter should be installed behind the vented door, which is located (depending on your model) along either the rear or left interior wall near the top of the refrigerator compartment.

1.Remove the air filter from its packaging.

2.Lift open the vented door.

3.Snap the filter into place.

Air Filter Status Indicator (on some models)

Style 1 - Install Manual Air Filter Status Indicator

The filter comes with a status indicator, which should be activated and installed at the same time the air filter is installed.

REPLACE

MONTHS

1.Place the indicator face-down on a firm, flat surface.

2.Apply pressure to the bubble on the back of the indicator, until the bubble pops to activate the indicator.

3.Lift open the vented air filter door. On some models, there are notches behind the door.

9

Image 9
Contents Refrigerator User Instructions Refrigerator SafetyInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer LocationRequirements Clean Before UsingElectrical Requirements Recommended Grounding MethodConnect the Water Supply Water Supply RequirementsReverse Osmosis Water Supply Tools NeededStyle 1-Standard Doors Refrigerator DoorsCabinet Freezer DoorStyle 2-Contour Doors Refrigerator DoorPlastic Handles Extend from the Door on some models Cabinet DoorsStyle 1-Standard Door Door Removal ReplacementStyle 2-Contour Door Door Removal Door Swing Reversal optional ReplacementAdjust the Doors Install Air FilterStyle 1 Install Manual Air Filter Status Indicator Filters Reset on some models Using the ControlsCONDITION/REASON Adjustment Refrigerator USERefrigerator Shelves Refrigerator FeaturesMeat Drawer CrisperWire Freezer Shelf Freezer FeaturesGlass Freezer Shelf Style 1 Plastic CoverDoor Rails Door FeaturesDoor Bins Utility Compartment and Can CaddyWater Filtration System Ice MakerTo Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsTroubleshooting Temperature and MoistureRefrigerator Operation Iceand Water AccessoriesWater Filtration System Performance Data SheetItems Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesRéfrigérateur Sécurité DU RéfrigérateurDéballage duréfrigérateur Instructions DinstallationAvant de jeter votre vieux réfrigérateur ou congélateur Nettoyage avant l’utilisationMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Spécifications del’alimentationen eauAlimentation en eau par osmose inverse Raccordement de la canalisation deauPression de leau Raccordement à une canalisation d’eauPortes du réfrigérateur Achever l’installation Démontage des portes et charnièresStyle 1 Portes standard Inversion des portes facultatifPorte du congélateur CaissePorte du réfrigérateur Style 2 Portes contourPortes Réinstallation Portes et charnièresRemarques Étapes finalesStyle 1-Porte standard Démontage et réinstallation De la portePoignée en plastique Style 2 Porte contourAjustement desportes Installationdu filtre à airUtilisation des commandes Utilisation DU RéfrigérateurCONDITION/RAISON Ajustement Réfrigérateur Tablettes du réfrigérateurTiroir à viande Bac à légumes Caractéristiques DU CongélateurTablette métallique ducongélateur Style 1 Couvercle en plastiqueTablette enverre du congélateur LA PorteTringles dans la porte Balconnets de porteSystème defiltrationde leau Machine à glaçonsStyle 1 Commande électronique Remplacement des ampoules d’éclairageEntretien DU Réfrigérateur NettoyageFonctionnement du réfrigérateur DépannageLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerAccessoires Température et humiditéGlaçons et eau Système de filtration d’eau Feuille DE Données SUR LA PerformanceGarantie Limitée Garantie DE Gros Appareil Ménager Whirlpool CorporationÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasW10343810A SP PN W10359300A

W10343810A specifications

The Whirlpool W10343810A is a highly efficient and versatile appliance that reflects the brand's commitment to innovation and quality. As part of Whirlpool's extensive range of home products, this model is specifically designed to enhance your laundry experience, combining advanced technology and user-friendly features for optimal performance.

One of the standout features of the W10343810A is its capacity. With ample space to handle large loads, this model allows users to do fewer laundry batches, saving both time and energy. This is particularly beneficial for families or those who frequently wash bulky items like bedding and towels. The drum is designed for optimal airflow, promoting even drying and minimizing wrinkles, which results in fresh, ready-to-wear clothes straight from the dryer.

The W10343810A is equipped with advanced sensor drying technology. This intelligent feature detects moisture levels in the clothes and automatically adjusts drying time for maximum efficiency. This not only conserves energy but also protects garments from over-drying, ensuring longevity and maintaining fabric integrity. With a variety of drying cycles available, users can select the perfect setting for different fabric types, providing versatility for a range of laundry needs.

Whirlpool has also integrated smart features into the W10343810A, allowing for seamless connectivity. Users can monitor and control their laundry remotely through a mobile app, which makes it easy to keep track of drying cycles and receive alerts when laundry is done. This connectivity offers added convenience for busy households, empowering users to multitask while ensuring their laundry is taken care of.

In terms of design, the W10343810A boasts a modern and sleek look, making it an attractive addition to any laundry room. Its user-friendly interface includes a digital display and intuitive controls, making operation straightforward and hassle-free. The durable construction guarantees reliability, while the easy-to-clean lint filter ensures maintenance is minimal.

Overall, the Whirlpool W10343810A stands out for its combination of capacity, advanced technology, energy efficiency, and user-centric design. It exemplifies Whirlpool's dedication to providing high-quality home appliances that meet the needs of today’s consumers. Whether you’re tackling everyday laundry or special items, the W10343810A is designed to deliver exceptional results.