Accessories

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

W10193172A, W10213155A specifications

Whirlpool has long been a trusted name in home appliances, and the release of models W10213155A and W10193172A continues this legacy. These products showcase the brand's commitment to innovative technology, user-friendly design, and high performance.

The Whirlpool W10213155A is known for its exceptional cleaning capabilities and efficiency. This unit features a powerful washing system that ensures a thorough clean, even for heavily soiled clothes. One of the standout technologies in this model is the Adaptive Wash Technology, which automatically adjusts the wash actions based on the size and weight of the load. This means every cycle is optimized, making it not only effective but also energy-efficient. The unit also incorporates an intuitive touchscreen interface that allows users to customize settings easily, providing flexibility for different laundry needs.

On the other hand, the Whirlpool W10193172A complements the line with its advanced drying technology. This model boasts an EcoBoost option that reduces energy usage while still delivering excellent drying performance. The DrySense technology is designed to monitor moisture levels and adjust drying times accordingly, preventing over-drying and ensuring clothes are returned to optimal condition. This model is particularly appreciated for its quiet operation, making it suitable for any home environment.

Both models come equipped with Smart Appliance features, allowing users to control and monitor their machines from their smartphones. This connectivity ensures that busy households can manage their laundry schedules efficiently, even when on the go. Another important characteristic is their durable build; both the W10213155A and W10193172A utilize high-quality materials that enhance longevity while ensuring ease of maintenance.

In terms of capacity, these Whirlpool models are designed to handle larger loads, making them ideal for families or those regularly washing bulky items like towels and bedding. Additionally, their aesthetic design fits seamlessly into any modern laundry space, presenting a sleek and user-friendly interface.

Overall, the Whirlpool W10213155A and W10193172A represent a blend of cutting-edge technology, energy efficiency, and reliable performance that caters to contemporary laundry demands. These appliances not only simplify the washing and drying process but do so with an emphasis on sustainability and ease of use, making them worthwhile additions to any household.