Utility or Egg Bin
(on some models- Accessory)
Depending on your model, you may have a one, two or three piece bin. Eggs may be stored in the egg tray or loose in the bin.
NOTE: Store eggs in a covered container for long term storage. If your model does not have an egg storage bin, store eggs in their original carton on an interior shelf.
Wine or Can/Bottle Rack
(on some models- Accessory)
To remove and replace the wine rack (left) or can/bottle rack (right):
1.Remove the rack by pulling it straight out from the shelf.
2.Replace the rack by sliding it in between the shelf and the wall of the refrigerator.
FREEZER FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Freezer Shelf
(numberof shelvesvaries withmodel)
To remove and replace the shelf:
1.Lift the shelf off of the supports.
2.Slide it out of the shelf support holes.
3.Replace shelf in the reverse order.
Frozen food storage guide
Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and
Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than
For more information on preparing food for freezing, check a freezer guide or reliable cookbook.
FreezerBasket
(plasticbin onsome models)
The freezer basket can be used to store bags of frozen fruits and vegetables that may slide off freezer shelves.
To remove and replace the freezer basket:
1.Remove basket by sliding it out to the stop.
2.Lift the front of the basket and slide it out the rest of the way.
3.Replace the basket by positioning it on the side wall guide rails. Lift the basket front slightly while pushing it past the guide rail stops and slide basket in the rest of the way.
DOOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Door Rails
The door rails may be removed for easier cleaning.
Snap-on Door Rails
To remove and replace the rails:
1.Remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail.
2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.
17