Whirlpool RC8920XRH, RC8950XRH manual Cleaning and caring for your cooktop, Control Dane1 and knobs

Page 14

1.To remove, slide out the side baffles.

2.Litt and pull out the heating ele- ment. Note: Make sure element is

completely cool before removing.

3.Remove motor

and rotisserie rack and set aside.

4.Plug in the heat- ing element.

5.Replace grills over heating element.

Cleaning and caring for your cooktop

1. First	make	sure	knobs are set on OFF then	2. Use	warm	soapy	water	and a	soft cloth to
pull	knob	straight	off.	wrpe	the	panel.	Rinse	and wipe	dry.

3. Wash	knobs in worm soapy water. Rinse	4. Push the knobs	straight back on. Make sure
well	and dry	they point to	OFF.

Image 14

Contents Cooktop Contents CooktopPage Model RC8920XRH Parts and featuresCopy your Model and Serial Numbers here Reflector Model RC8950XRHHEATING-k\ Surface unit indicators Using your cooktopUsingthe control knobs ‘1 SurtaceUnltUsing the vent system Using the coil element moduleUsing the grill module Use MED-LO toTimes ROWBefore using the griddle for the first time Using the solid element moduleUsing the optional griddle module Approximate griddle cooklng timesApproximate minimum rotlsserie cooklng times Using the optional rotisserieUsing the optional smoothtop module Cooking Changing cooktop modules Coil element, solid element and smoothtop modulesPut Accessory canning kit Par? noGrill module Optional griddle module Optional rotisserieCleaning and caring for your cooktop Control Dane1 and knobsBe sure toll elements are OFF Coil elements and reflector bowlsRemovlngReplaclng Be sure controls are OFF and elements are CoolSolid elements Smoothtop moduleCleaning cooktopopchart HOW to CleanCleaning the vent system Before cleaning the vent system, turnIf you need assistance? If you have a problem?Before calling for assistance If you need setice?Home Appliances Making your world a little easier