Whirlpool RC8200XK manual Cleaning Chart

1.Be sure surface unit controls are OFF.

Receptacle Bowl

Opening

2.Line up opening in the reflector bowl with the surface unit receptacle.

Terminal

ptacle

3.Hold the surface unit as level as possible

with the terminal just started into the receptacle.

4.While pushing the surface unit terminal into

the receptacle, lift a little on the edge of the unit nearest the receptacle.

5.When the terminal is pushed into the re- ceptacle as far as it will go, the surface unit will fit into the reflector bowl

Reflector bowls reflect heat back to the utensils on the surface units, They also help catch spills. When they are kept clean, they reflect heat better and look new longer.

If a reflector bowl gets discolored, some of the utensils used may not be flat enough. Or some may be too large for the surface unit. In either case, some of the heat that is meant to go into or around a utensil goes down and heats the reflector bowl. This ex- tra heat can discolor it.

CLEANING CHART

PART		WHAT		TO USE
Outside	of	Soft	cloth,		warm		soapy
cooktop		water
		Nylon		or	plastic		scouring
		pad	for stubborn					spots
Surface	units	No	cleaning			required
Control	knobs	Warm,		sudsy		water		and
		bristle		brush
Chrome	reflector	Automatic				dishwasher,
bowls		warm		soapy		water		or
		plastic		scrubbing				pad
Control	panel	Warm,		soapy		water

HOW TO CLEAN

l Wipe off regularly when cooktop is cool.

l Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk) to remain on surface. Acids will remove the glossy finish.

lDo not use abrasive or harsh cleansers.

l Spatters or spills will burn off.

lDo not immerse in water.

lWash, rinse and dry well. l Do not soak.

0 Clean frequently.

l Wash with other cooking utensils.

lDo not use harsh a brasives.

lWash, rinse and dry with soft cloth.

6