Whirlpool RC8900XMH manual Changing cooktop modules, Surface unit modules, Grill module

Page 8

Changing cooktop modules

The cooktop modules will work on either side of the cooktop. Make sure all controls are OFF and the modules are cool before removing them.

Surface unit modules

1.To remove, lift slightly by the handle.

Terminal

2. With both hands,		pull	3. Lift out and set aside
module	toward	you to
unplug	it.

1. To replace,	line	up the	2. Push terminal into	place	Lower the front with the
terminal	with	the	until it’s plugged	in.	handle.
receptacle.

Grill module

1. To	remove,	2. Lift	heating		3. Lift out splat-
lift	off grills.	element			ter shield.
		slightly		and
		pull	toward
		you.

1. To	replace,			2. Put in		splat-	3.	Plug	heat-
lower		the		ter	shield.			ing element
grease		well						terminal	into
into		open-						receptacle.
ing.
All	grill	parts	must be	cleaned	after each		use to	avoid	excessive
fat	spoilage		and odors.	See	page	14.

4.Lift and re-

move the grease well, being care- ful not to sbill fat dri’p- pings.

4. Place grills over heat- ing element.

smoke, flare-ups,

8

Image 8

Contents Modular Down Draft Cooktop Contents Before you use your cooktopPage Model RC8900XMH Parts and featuresCopy your Model and Serial Numbers here Using your cooktop IndicatorsUsing the control knobs SurfaceBefore using the grill for the first time Using the surface unitsUsing the vent system Using the grill Approximate grill cooking times FoodGrill module Changing cooktop modulesSurface unit modules Using optional modules Using the griddleBefore using the griddle for the first time Approximate griddle cooking timesUsing the rotisserie To put meat on spitUsing the smoothtop \ fT3Cleaning and caring for your cooktop Accessory canning kit Part noCare and Cleaning Control panel and knobsSurface units and reflector bowls RemovingReplacingCleaning cooktop modules VentIf you need service If you have a problemBefore calling for assistance If you need assistance~irlpuol