Whirlpool SM958PES, SM988PES manual Changing the Pre-programmed Setting, Auto Set Temp

Page 19

When Auto Set TIME ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day

NOTE: You can set COOK 1, COOK 1 and 2 and/or PROBE TEMP to follow Auto Set TIME. (See pages 14-17 for instructions.)

Changing the Pre-programmed Setting

You can change the pre-programmed cooking time and Cook Power in Auto Set TIME to the time and power you most often use. To change the Auto Set TIME setting, follow these steps:

1.Open the door.

2.Touch TIME twice.

3.Touch the Number Pads for the new desired cooking time. If HIGH Cook Power is desired, skip to Step 6.

4.Touch COOK POWER.

5.Touch the Number Pad for the desired Cook Power.

6.Touch START.Touch CANCEL. The oven will remember that cooking time and Cook Power for future use. NOTE: If the electric power ever goes off,

the oven will go back to the pre-programmed 2 minutes, 30 seconds at HIGH Cook Power.

Auto Set TEMP

Auto Set TEMP provides ten preset probe temperature settings. One hundred ten (110)to one hundred ninety (190) degrees at 70% Cook Power can be

selected by touching TEMP and the corresponding Number Pad (l-9). You don’t need to touch any additional Number Pads. This provides a short-cut method for setting commonly used probe temperatures.

The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use Auto Set TEMP to cook various food items without having to look up the temperature.

A preset temperature of 165°F at HIGH Cook Power is available after inserting the probe, by touching just the TEMP Pad. This temperature may be changed to any temperature from 90°F to 200°F allowing you to store your favorite cooking temperature and Cook Power, or to pre-program the oven for some- one else to cook an already prepared dish at a latertime. See page 21 for instructions.

continued on next page

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents III Contents Upper Microwave Oven Parts and featuresBefore you use your microwave oven For Use of Microwave Upper Oven Safety InstructionsMicrowave Oven Controls Using your microwave ovenItal Display/Clock 8 icator Lights Command PadsNumber Pads Audible SignalsWWW Setting the ClockChanging Minute Timer Using Minute TimerCancelling the Minute Timer Cooking in Your Microwave Oven Cooking at High Cook PowerChanging the Cooking Time Cooking at Lower Cook PowersCount Cooking in More Than One Cook Cycle Changing the Cook PowerPage Dnwn Changing or Adding Instructions Using Auto SETAuto Set Time This Happens Auto Set Temp Changing the Pre-programmed SettingThis Happens Additional Information Defrosting About the Quick Defrost Cycle Cooking Automatically After DefrostingChanging or Adding Defrost Time Touch Cook POWER. Option Standing Time After Defrosting Cooking with the Temperature Probe Display will show what DON’T SettingHints for Using the Temperature Probe Temperature probe cooking tipsRemoving and cleaning the Temperature Probe Using Start Time to Delay Start of CookingCount down Additional Information To Automatically Follow Another Cycle Using Keep WarmInserting the Rack Cleaning the RackOther Operating Hints Bi-Level Cooking bckModel SM988PESReplacing the Light Bulb Cleaning the Microwave OvenCaring for Your Microwave Oven Optional Bi-Level Cooking Rack KitHow your microwave oven works Nevercook or Reheata Whole EGG. Steam build-up Operating safety precautionsDo not try to melt paraffin wax in the oven. You could General InformationBefore calling for Assistance If you need assistance? If you need service%Whirlpool Microwaw Oven Range Product
Top Page Image Contents