QSC Audio ISIS 215SB user manual USE- LED Indicators and Important User Caution

Page 21

USE- LED Indicators (continued) and Important User Caution

LED Indicators (continued)

NOTE! If both PWR indicator LED’s fail to illuminate after turning the power to the 215PCM on, verify the AC power is working and is properly connected. If this fails to correct the

problem, disconnect the DataPort connections (if any) and retry. If the PWR indicator illuminates now, the DataPort was forcing the amplifier into Standby mode. Refer to

QSControl documentation for information regarding amplifier Standby power status.

If one Processor’s PWR indicator illuminates and the other’s does not, it is possible that one of the amplifiers could have a problem. First, disconnect the DataPort connections (if any) and retry. If the PWR indicator illuminates now, the DataPort was forcing the amplifier into Standby mode. Refer to QSControl documentation for information regarding amplifier Standby power status. If the indicator still fails to illuminate, have the 215PCM serviced by a qualified technician.

IMPORTANT USER CAUTION

The 215PCM has been equipped with a very powerful internal amplifier. The amplifier power is several times greater than the long-term power capacity of the drivers. This allows the full capacity of the

speakers to be used without reaching the clipping point of the amplifier. The extra power is provided for greater dynamic range and impact, but the drivers can be damaged by excessive long-term operating

levels. To avoid speaker damage as well as amplifier thermal muting, the user should observe the following operating limits:

Average program power, 1-minute duration: 1500 watts (3dB below clipping point, 50% average power)

Average program power, 1-hour duration: 1000 watts (5dB below clipping point, 33% average power)

Average program power, 8 hours or more: 800 watts ( 6dB below clipping point, 25% average power).

These limits apply for speakers at normal operating temperatures. If the speakers have already been running at one of the long-term limits, they will be at their full rated temperature, and should not be pushed to a higher short-term power limit. When using a short-term operating limit, there must be a similar “rest” period between each run.

The speakers must be operated within their rated frequency range to avoid cone damage from overexcursion. If there is audible distortion on certain notes, this must be noted as the maximum operating level, and average levels must be regulated against this limit according to the figures shown above. Speakers operated at these maximum limits will experience severe flexing stress, and should be inspected frequently for damage around the edge of the cone, using a flashlight through the speaker grille.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Isis 215SB Important Safety Precautions Explanation of Symbols Table of Contents INTRODUCTION- General Overview 215PCM Powered Control Module HighlightsIntroduction Composilite215PCM Front Technical Overview INTRODUCTION- Technical OverviewINTRODUCTION- Block Diagram Unpacking and Inspection For 215SB Subwoofer Only UsersQSC shipping box should contain For 215PCM Powered Core Module Users Preparation for First USE- Amplifier Gain Controls Adjusting the Gain Settings of the AmplifiersCONNECTIONS- AC Power AC Power SwitchUse only heavy-duty 12 or 10 ga. extension cords To Configure a Processor 215PCM only CONNECTIONS- RS-232 Processor Configuration ConnectionRS-232 Connection 215PCM only Important pointsMode Switch 215PCM only CONNECTIONS- Mode Switch and Signal RoutingCONNECTIONS- Audio Connections XLR Inputs Audio ConnectionsXLR Inputs XLR Connections CONNECTIONS- XLR Connection Recommendations and PinoutsTerminal Block Connector Pinouts CONNECTIONS- Post Processor OutputsPost Processor Outputs What is a DataPort? CONNECTIONS- DataPort QSControl users onlyDataPort Connections Output to Top Boxes CONNECTIONS- Output to Top Boxes SpeakonsCooling Air Inlet and Exhaust Vents USE- Cooling Air Inlet and Exhaust VentsLED Indicators USE- AC Power Switch and LED IndicatorsImportant User Caution USE- LED Indicators and Important User CautionSystem Requirements Software InstallationProcessor USE General Guidelines and Preset Description General Use Guidelines for Freely-Configurable DSPFactory Presets Presets Configuring the ProcessorsHow to Save Configurations into a Processor’s Preset Processor Use Configuring the Processors Discrete Discrete 2.1 Checklist Combo Mode preferred Discrete Mode optional Processor Use Configuring the Processors 3-way Mono Stack215PCM won’t turn on when the Power switch is operated TroubleshootingAudio time alignment isn’t right Troubleshooting Specifications- Isis 215SB Specifications- Isis 215SB Acoustic Performance Power Handling4 215SB Specifications Frequency RangeConnector Wiring of ConnectorSpecifications- Isis 215PCM Description 215PCM System SpecificationAmplifier Specifications Specifications- Isis 215PCM AmplifiersDigital Signal Processor Specifications Specifications- Isis 215PCM ProcessorsAPPENDIX- Contact Closure Wiring Details Contact Closure FeatureWiring Diagram for Contact Closure RS-232 Pinout APPENDIX- RS-232 Pinout and Pin #9 Usage NoteDisclaimer Product Warranty

ISIS 215SB specifications

The QSC Audio ISIS 215SB is a powerful subwoofer designed to meet the needs of live performances, installations, and various audio applications. Engineered with excellence, the ISIS 215SB offers an impactful bass response, making it a reliable choice for professionals in the music and entertainment industry.

At the heart of the ISIS 215SB is its dual 15-inch low-frequency drivers. These drivers are specifically designed to produce deep, resonant bass tones with high efficiency. The subwoofer features a remarkable power handling capacity, allowing it to deliver robust sound levels without distortion. With an impressive peak power rating, the ISIS 215SB can easily handle complex musical passages while maintaining clarity and punch.

One of the standout technologies of the ISIS 215SB is its advanced cabinet design. Constructed from high-density plywood, the enclosure is built for durability and strength. This design minimizes unwanted resonance, ensuring that the audio output remains clean and powerful. The cabinet also features a durable finish that can withstand the rigors of touring and live events, making it an excellent investment for audio professionals.

The ISIS 215SB is also equipped with a sophisticated integrated amplifier that ensures consistent performance across a wide range of frequencies. This amplifier is engineered to work seamlessly with the drivers, providing optimal power distribution and protection from overheating. The result is a subwoofer that can perform reliably in demanding conditions, whether it’s in a concert hall, nightclub, or outdoor event.

Connectivity is another significant aspect of the ISIS 215SB. It includes multiple input options, allowing for easy integration into various audio systems. The subwoofer features speakON connectors, which provide secure and stable connections, reducing the risk of signal loss during performance. This versatility enables the ISIS 215SB to be a formidable component of any sound system.

The design of the ISIS 215SB also prioritizes portability. Weighing comparatively less than many other subwoofers in its class, it comes with built-in handles for easier transportation. This feature is especially beneficial for touring professionals who require mobility without sacrificing sound quality.

In conclusion, the QSC Audio ISIS 215SB subwoofer is a leading choice for those seeking a blend of power, durability, and versatility. Its dual 15-inch drivers, advanced cabinet construction, integrated amplifier, and connectivity options make it an excellent solution for various audio applications, delivering the high-quality low-frequency performance expected from a top-tier audio product.
Top Page Image Contents