EN
Specifications
Frequency Response1: | 80- 21k Hz |
|
| 60- 22k Hz |
|
Maximum Output2: | 113 dB SPL continuous rms output | |
(calculated) | 119 dB SPL peak output | |
Impedance: | 8 ohms nominal |
|
| 7.0 ohms minimum, 210 Hz | |
| 135 ohms maximum | |
Power Rating3: |
|
|
rms (IEC 100 hrs): | 200 watts rms |
|
recommended amp power: | 400 watts rms |
|
Sensitivity: | 90.5 dB, 1 watt, 1 meter, free field (4 pi) | |
Directivity Index: | 500 Hz | 4.0 |
| 1000 Hz | 5.5 |
| 2000 Hz | 11.7 |
| 4000 Hz | 8.9 |
| 8000 Hz | 8.6 |
| 16000 Hz | 7.2 |
Q: | 500 Hz | 2.5 |
| 1000 Hz | 3.6 |
| 2000 Hz | 14.7 |
| 4000 Hz | 7.7 |
| 8000 Hz | 7.3 |
| 16000 Hz | 5.3 |
Weight: | ||
| ||
Nominal Coverage: | 90° horiz. x 60° vert., waveguide can be rotated 90° | |
Enclosure and Grill: | high impact polystyrene, removable metal grill, logo badge can be rotated | |
Connectors: | two (2) Neutrik Speakon NL4FC connectors wired in parallel, +signal: pin 1+, - signal: pin 1- | |
Mounting Hardware: | Included: Pole cup (attaches to loudspeaker bottom or optional yoke mount, | |
| fits 1.375” or 1.500” (35 mm or 38 mm) diameter poles) and | |
Optional: Yoke mount with retaining knobs, two swivel feet for using yoke mount as stage monitor, pole cup (attaches to loudspeaker bottom or optional yoke mount, fits 1.375” or 1.500” (35 mm or 38 mm) diameter poles) and
NOTES:
1- All frequency ranges specified refer to measured
2- Calculated maximum peak SPL at 1 m,
3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice.
8