Mounting
Stand Alone Mounting
If using the loudspeaker only, it can be set on any appropriate surface. The cabinet will lean back at a slight angle when set on a flat surface. Install the four
On the back of the loudspeaker, near the bottom, is a safety cable attachment point. Install a safety cable strong enough to support several times the weight of the loudspeaker assembly in the event it may fall. The cable must be secured to a secondary support point which is also strong enough to sup- port several times the loudspeaker’s weight.
IMPORTANT! ENSURE THAT THE LOUDSPEAKER IS MOUNTED PROP- ERLY AND A SAFETY CABLE IS INSTALLED TO RETAIN THE LOUD- SPEAKER IN THE EVENT OF A MOUNT- ING FAILURE.
Pole Cup
The included pole cup will fit 1.375” and 1.500” (35 and 38 mm) diameter poles. To use the pole cup, thread the adapter into the insert on the bottom of the loudspeaker. Ensure the adapter is secure before mounting on pole. Set the pole cup onto the pole and make sure the pole seats fully into the adapter. 1.500” (38 mm) poles will seat about 2” (50
mm)deep in the adapter, and 1.375” (35 mm) poles will seat about 4” (100 mm) deep in the adapter. Make sure the set screw retaining knob is in the correct hole for the pole size used and that it is tightened.
5/8”-27 Mic Stand Adapter
The mic stand adapter is intended for use with
Ensure the mounting surface and support- ing structure are
appropriately strong enough to support the loudspeaker assembly and any potential vibration or seismic activity.
Attach a safety cable to the attachment point on the bot-
EN
5