ElectricalElectrical Requirementsconnection

ElectricalElectrical

requirementsconnection

B n Where local codes Do Not permit connecting the frame-grounding conductor to the neutral (white) junction box wire: (Used for all Canadian installations).

cable from power supply

I I iunctlon box

Electrical Shock Hazard Electrically ground cooktop.

Failure to follow this instruction could result in death, fire, or electrical shock.

If codes permit and a separate grounding wire is used, it is recommended that a qualified electrician determine that the grounding path is adequate.

Do Not ground to a gas pipe.

Check with a qualified electrician if you are not sure the cooktop is properly grounded.

Do Not have a fuse in the neutral or grounding circuit.

IMPORTANT:

Save Installation Instructions for electrical inspector’s use.

A n A three-wire, single-phase,

240-volt, 60-Hz, AC-only electrical supply is required on a separate, 40-ampere circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The rating of the fuse or circuit breaker should be equal to the marked current rating (amps) on the appliance, but not larger than the nex-t standard fuse or circuit breaker size. The marked current rating is specified on the model/serial rating plate located on the bottom of the cooktop.

B n THECOOKTOP MUSTBE CONNECTED WITH COPPER WIRE ONLY

C l Wire sizes and connections must conform to the requirements of the National Electrical Code ANSVNFPA 70 - latest edition**, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91 - latest edition*** and all local codes and ordinances.

Copies of the standards listed may be obtained from:

l * National Fire Protection Association

Batterymarch Park

Quincy, Massachusetts 02269

l ** Canadlan Standard Assoclatlon 178 Rexdale Boulevard

Etobicoke (Toronto), Ontario M9W lR3

Dn The cooktop should be connected directly to the fused disconnect or circuit breaker box through flexible, armored or non- metallic sheathed, copper cable. The flexible, armored cable extending from the fuse box or circuit breaker box should be connected directly to the junction box.

En Locate the junction box to allow as much slack as possible between junction box and the cooktop so that the cooktop can be moved if servicing is ever necessary. Do Not cut the conduit.

Fn A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply cable (at the cooktop and at the junction box).

Electrical Shock Hazard

Disconnect power to the junction box before making connection.

Electrically ground cooktop.

Failure to follow these instructions could result in death, fire, or electrical shock.

This cooktop must be connected to a grounded, metallic permanent wiring system or a grounding connector should be connected to the grounding terminal or wire lead on the cooktop.

This cooktop is manufactured with a frame-connected, green or bare grounding wire.

Connect the cooktop cable to the junction box through the U.L.-listed or C.S.A.-listed conduit connector. Complete electrical connection according to local codes and ordinances.

A n Where local codes permit connecting the frame-grounding conductor to the neutral (white) junction box wire: (Not used for Canadian installations).

	cable	from
	power	supply
	I	I	JunFtion box
	I	I
red wires	AL		/

white wire II Y/

bare or’ green wire

U.l.-or C.S.A.-listed conduit connector

cable from cooktop

Grounded neutral

Figure 1

1.Disconnect power supply.

2.Connect the flexible armored cable from the cooktop to the junction box using a U-L.- or C.S.A.-listed conduit connector. Tighten screws on conduit connector.

3.Connect the green (or bare) appliance cable wire with the neutral (white) wire in the junction box.

4.Connect the two black wires together; then connect the two red wires together with twist-on wire connectors. (See Figure 1.)

bare or green wires

conduit connector

cable from cooktop

Ungrounded neutral

Figure 2

1.Disconnect power supply.

2.Connect the flexible armored cable from the cooktop to the junction box using a U.L.- or C.S.A.-listed conduit connector. Tighten screws on conduit connector.

3.Connect the two black wires together; then connect the two red wires together with twist-on wire connectors. (See Figure 2.)

4.Connect the green (or bare) grounding wire from the appliance cable to the grounded wire in the junction box or other grounded connector.

5.Put a twist-on wire connector on end of white wire.

Panel B

4454653 specifications

The Whirlpool 4454653 is an advanced wall oven designed for optimal cooking performance and user convenience. This modern appliance is packed with features that cater to both amateur cooks and culinary enthusiasts, making it an essential addition to any kitchen.

One of the standout features of the Whirlpool 4454653 is its enhanced cooking technology. It utilizes True Convection cooking, which circulates hot air throughout the oven. This provides even cooking results and significantly reduces cooking time, allowing users to enjoy perfectly baked goods and roasted dishes. Additionally, this wall oven is equipped with an integrated probe that monitors the internal temperature of meats, ensuring that they are cooked to perfection without the risk of overcooking.

The oven boasts a spacious interior, which is designed to accommodate multiple dishes at once. Whether you are preparing a family dinner or hosting a gathering, the generous capacity allows you to maximize your cooking efficiency. The appliance also features a self-cleaning option, making maintenance a breeze. This feature uses high heat to burn off food residue, eliminating the need for harsh cleaning chemicals and making it easy to keep the oven pristine.

Another notable characteristic of the Whirlpool 4454653 is its intuitive control panel. The digital display makes it simple to navigate through functions, while the touch controls enable precise temperature adjustments. The oven also includes a variety of cooking presets, which take the guesswork out of meal preparation. This user-friendly interface allows cooks to focus on creating delicious meals without being distracted by complicated settings.

In terms of design, the Whirlpool 4454653 seamlessly integrates into modern kitchens. Its sleek finish and elegant lines complement various kitchen styles, while the built-in design saves valuable space. The oven's construction is durable, ensuring it can withstand the rigors of daily cooking.

Furthermore, smart technology features are integrated into this wall oven, allowing users to connect their devices for remote access. This means you can preheat your oven or adjust settings from your smartphone, providing unparalleled convenience for busy lifestyles.

In summary, the Whirlpool 4454653 wall oven combines cutting-edge technology with user-friendly features and a stylish design. Its True Convection cooking, spacious interior, self-cleaning capability, and smart technology integration make it a remarkable choice for anyone looking to enhance their culinary experience.