Whirlpool W10189345A, W10189344A warranty Ice Maker and Storage Bin, To Dispense Ice

Page 5

To Dispense Ice:

1.Press the button to select the desired type of ice.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2.Press a sturdy glass against the ice dispenser lever. Hold the glass close to the dispenser opening so ice does not fall outside of the glass.

IMPORTANT: You do not need to apply a lot of pressure to the lever in order to activate the ice dispenser. Pressing hard will not make the ice dispense faster or in greater quantities.

3.Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds after removing the glass from the lever. The dispenser may continue to make noise for a few seconds after dispensing.

The Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may choose either ON or DIM. The display screen indicates which mode is selected.

ONDIM OFF

ON: Press LIGHT to turn the dispenser light on.

DIM: Press LIGHT a second time to select DIM mode. The dispenser light will remain on, but at a lower intensity.

OFF: Press LIGHT a third time to turn the dispenser light off.

The dispenser lights are LEDs that can not be changed. If it appears that your dispenser lights are not working, see “Troubleshooting” for more information.

The Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the dispenser controls and levers. To turn off the ice maker, see “Ice Maker and Storage Bin.”

Press and hold LOCK for 3 seconds to lock the dispenser.

Press and hold LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked.

LOCKED UNLOCKED

Ice Maker and Storage Bin

Turning the Ice Maker On/Off

The On/Off switch is located on the top right-hand side of the freezer compartment.

To turn on the ice maker, slide the control to the ON (left) position.

To manually turn off the ice maker, slide the control to the OFF (right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

REMEMBER:

Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the dispenser mechanism.

Do not store anything on top of or in the ice maker or storage bin.

Removing and Replacing Ice Storage Bin

1.Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”) on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the storage bin on the door and push down to make sure it is securely in place.

5

Image 5
Contents Refrigerator User Instructions Refrigerator SafetyTemperature Control Adjustment and Cooling On/Off Using the ControlsRefrigerator USE Before You Throw Away Your Old Refrigerator or FreezerCondition Temperature Adjustment Crisper Humidity Control ConvertibleDrawer Temperature ControlDoor Chill Control Water and Ice DispensersTo Dispense Ice Ice Maker and Storage BinTo Clean Your Refrigerator CleaningRefrigerator Care Water FiltrationSystemRefrigerator Operation TroubleshootingMotor seems to run too much Refrigerator is noisyIceand Water Temperature and MoistureAccessories Application Guidelines/Water Supply Parameters Performance Data SheetsBase Grille Water Filtration System Items Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesRéfrigérateur Sécurité DU RéfrigérateurAjustement des commandes Utilisationdes commandesUtilisation DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurCondition Ajustement DE LA Température Commande du compartiment fraîcheur Commande de température dans Le tiroir convertibleDistributeurs d’eauet de glaçons Distribution d’eauDistribution de glace Machineà glaçons et bac dentreposageEntretien DU Réfrigérateur Remplacement du filtre à eauSystème de filtration de leau NettoyageFonctionnement du réfrigérateur Remplacementdes ampoules d’éclairageDépannage Glaçons et eau Température et humiditéLeau du distributeur nest pas assez froide AccessoiresNettoyant et poli pour acier inoxydable Cartouche du filtre de la base standardSystème de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base Garantie Limitée Garantie DES Gros Appareils Ménagers Whirlpool CorporationArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pas

W10189345A, W10189344A specifications

The Whirlpool W10189344A and W10189345A are innovative appliance solutions designed to enhance the convenience and efficiency of modern kitchens. These models are part of Whirlpool’s commitment to providing high-quality, reliable products that cater to consumer needs.

One of the standout features of these models is the smart technology integration that allows users to control their appliance remotely via a smartphone app. This feature enables users to monitor their appliance’s performance, receive alerts, and even change settings from anywhere in the home. This not only adds a layer of convenience but also promotes energy efficiency as users can optimize their appliance usage based on real-time data.

Both models incorporate advanced sensor technology, which automatically adjusts cooking times and temperatures based on the food being prepared. This ensures that meals are cooked to perfection every time. The sensors help detect food moisture levels and adjust the cooking process accordingly, which is particularly beneficial for users who want to achieve optimal results without the need for constant supervision.

In terms of design, the W10189344A and W10189345A boast a sleek, modern aesthetic that fits seamlessly into any kitchen décor. Their compact design allows for easy installation in smaller spaces while still providing ample cooking capacity. The user-friendly interface includes intuitive controls that simplify operation, making it accessible for users of all ages.

Safety is another key characteristic of these models. They come equipped with child lock features and an automatic shut-off option, which provides peace of mind for families with young children. These safety measures ensure that the appliance cannot be accidentally activated or left on for too long, preventing potential hazards.

Additionally, the energy efficiency of the W10189344A and W10189345A models is worth noting. Designed with eco-friendly considerations, they utilize energy-efficient components that minimize electricity consumption without sacrificing performance. This not only helps consumers save on utility bills but also contributes to reduced environmental impact.

In conclusion, the Whirlpool W10189344A and W10189345A appliances represent a blend of modern technology, stylish design, and user-friendly features. Their smart capabilities, sensor technology, safety features, and energy efficiency make them ideal choices for anyone looking to enhance their kitchen experience. Whether for cooking, baking, or reheating, these models ensure that users have access to reliable and effective performance every time.