Whirlpool W10162459A, W10162458A Refrigerator Care, Water Filtration System, Cleaning

Page 10

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change your water filter. When the water filter status display changes from “GOOD” to “ORDER,” this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to “REPLACE.” If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months depending on your water quality and usage.

After changing the water filter, reset the status light by pressing and holding the FILTER button for 3 seconds. The status light will change from “REPLACE” to “GOOD” when the system is reset.

Changing the Water Filter

1.Press the eject button to release the filter from the base grille.

2.Pull the filter straight out.

3.Turn the cap counterclockwise to remove it from the filter.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

4.Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place.

5.Remove the covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.

6.Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.

7.Flush the water system. See “Water and Ice Dispensers.”

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1.Unplug refrigerator or disconnect power.

2.Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

3.Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water.

4.There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency. If you need to clean the condenser:

■Remove the base grille.

■Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area of the condenser.

■Replace the base grille when finished.

5.Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. Replacement bulbs are available from your dealer.

■The dispenser lights are LEDs that can not be changed.

■All other lights require a 40-watt bulb.

1.Unplug refrigerator or disconnect power.

2.Remove light shield when applicable.

NOTE: To clean the light shield, wash it with warm water and liquid detergent. Rinse and dry the shield well.

3.Remove light bulb and replace with one of the same size, shape and wattage.

4.Replace light shield when applicable.

5.Plug in refrigerator or reconnect power.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsBefore You Throw Away Your Old Refrigerator or Freezer Water Supply Requirements LocationRequirementsElectrical Requirements Recommended Grounding MethodReverse Osmosis Water Supply Connect Water SupplyStyle Temperature Control Adjustment and Cooling On/Off Using theControlsRefrigerator USE Additional Features Fast Cool & Fast Ice Adjusting the ControlsCondition Temperature Adjustment Refrigerator ControlsChilled Door Bin ConvertibleDrawer Temperature ControlCrisper Humidity Control Water and Ice DispensersTo Dispense Water Standard To Dispense Water Measured FillIce Maker and Storage Bin To Dispense IceRefrigerator Care CleaningTo Clean Your Refrigerator Water Filtration SystemMotor seems to run too much TroubleshootingRefrigerator Operation Refrigerator is noisyTemperature is too warm Temperature and MoistureIceand Water Water dispenser will not operate properly AccessoriesStainless Steel Cleaner and Polish Recently dispensed large amount of water? Allow 24 hoursPerformance Data Sheets Application Guidelines/Water Supply ParametersBase Grille Water Filtration System This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Achever l’installation Utilisation des commandesUtilisation DU Réfrigérateur Condition Ajustement DE LA Température Compartiment fraîcheur dans la porte Commande de température dans Le tiroir convertibleDistributeurs d’eauet de glaçons Le distributeur deau Distribution deau standardDistribution deau remplissage mesuré Unités Par défaut Minimum MaximumMachineà glaçons et bac dentreposage Distribution de glaceNettoyage Entretien DU RéfrigérateurSystème de filtrationde leau Nettoyage de votre réfrigérateurDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Glaçons et eau Température et humiditéLes portes sont difficiles à ouvrir Nettoyant et poli pour acier inoxydable AccessoiresCartouche du filtre de la base standard Feuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base Articles Exclus DE LA Garantie Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pas

W10162458A, W10162459A specifications

The Whirlpool W10162459A and W10162458A are essential accessories for enhancing kitchen operations, particularly in Whirlpool kitchen appliances. These models cater primarily to the need for improved filtration and performance, ensuring that appliances work efficiently while providing cleaner, healthier results.

One of the standout features of these models is their advanced filtration technology, which effectively removes unwanted contaminants from water. Users can expect a significant reduction in impurities, which contributes to improved taste and quality of water and ice produced by refrigerators. This technology is vital for consumers who are health-conscious and prefer fresh water free from chlorine and other undesirable chemicals.

The W10162459A and W10162458A models are designed for easy installation, ensuring that even those without technical expertise can replace their old filters with these new units. The process is straightforward due to the user-friendly design, which aligns perfectly with Whirlpool appliances, making maintenance a hassle-free experience. This characteristic emphasizes convenience, catering to busy individuals and families who rely on their kitchen appliances for daily functioning.

Durability is another key characteristic of these filters. Constructed with high-quality materials, they are built to last and maintain performance over extended periods. The replaced filters not only promise efficiency but also reduce the frequency of replacements, saving consumers both time and money in the long run.

In terms of compatibility, the W10162459A and W10162458A are designed to fit a range of Whirlpool refrigerator models. This versatility makes them a popular choice among consumers with different appliance models, ensuring that users are not limited by specific models or brands when looking for replacement filters.

Moreover, the filters meet or exceed industry standards for water filtration, instilling confidence in users about the safety and quality of their drinking water. The technology within these models assures users that they are making a smart choice for their health and well-being.

In summary, the Whirlpool W10162459A and W10162458A filters offer a combination of advanced filtration technology, easy installation, durability, compatibility, and adherence to safety standards. These features make them indispensable accessories for anyone looking to enhance their kitchen experience, ensuring that their appliances operate optimally while providing fresh, clean water.
Top Page Image Contents