Whirlpool W10162459A, W10162458A Adjusting the Controls, Refrigerator Controls, Freezer Controls

Page 6

IMPORTANT:

■Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the set points to a higher (colder) than recommended setting will not cool the compartments any faster.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

■The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

■The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated, additional presses of control buttons will change the applicable settings.

Adjusting the Controls

To adjust the set points, press and hold the TEMPERATURE button for 3 seconds. When adjust mode is activated, set points and adjusting information will appear on the display screen.

NOTE: To view Celsius temperatures, press the FILTER button when adjust mode is activated. To return the display setting to Fahrenheit, press FILTER again.

Refrigerator Controls

When adjust mode is activated, the LOCK and FAST ICE/COOL buttons adjust the refrigerator compartment temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).

■Press LOCK to lower the set point.

■Press FAST ICE/COOL to raise the set point.

Freezer Controls

When adjust mode is activated, the ICE and LIGHT buttons adjust the freezer compartment temperature. The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).

■Press ICE to lower the set point.

■Press LIGHT to raise the set point.

CONDITION:

TEMPERATURE

 

ADJUSTMENT:

 

 

REFRIGERATOR too cold

REFRIGERATOR Setting

 

1° higher

 

 

REFRIGERATOR too warm

REFRIGERATOR Setting

 

1° lower

 

 

FREEZER too cold

FREEZER Setting

 

1° higher

 

 

FREEZER too warm/too little ice

FREEZER Setting

 

1° lower

 

 

Press TEMPERATURE to exit adjust mode, or allow about 15 seconds of inactivity and adjust mode will turn off automatically.

Additional Features

NOTE: The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated, additional presses of control buttons will change the applicable settings.

Fast Cool & Fast Ice

The Fast Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.

The Fast Ice feature assists with temporary periods of heavy ice use by increasing ice production over a 24-hour period.

■Press the FAST ICE/COOL button to turn on the Fast Cool feature. When the feature turns on, the “Fast Cool” animation will appear on the dispenser display.

The Fast Cool setting will remain on for 24 hours unless manually turned off.

■Press FAST ICE/COOL again to turn off Fast Cool and turn on the Fast Ice feature. When the feature turns on, the “Fast Ice” animation will appear on the dispenser display.

The Fast Ice setting will remain on for 24 hours unless manually turned off.

■Press FAST ICE/COOL a third time to activate Fast Cool and Fast Ice at the same time. When the features are activated, both the “Fast Cool” and “Fast Ice” animations will appear on the dispenser display.

■Press FAST ICE/COOL a fourth time to turn both Fast Cool and Fast Ice off.

When Fast Cool and/or Fast Ice are active, the temperature display will not change. After 24 hours, the refrigerator returns to the previous temperature set points.

NOTE: If increased ice production is desired at all times, change the freezer control to a lower setting. Setting the freezer to a colder temperature may make some foods, such as ice cream, harder.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer Water Supply Requirements LocationRequirementsElectrical Requirements Recommended Grounding MethodConnect Water Supply Reverse Osmosis Water SupplyStyle Using theControls Temperature Control Adjustment and Cooling On/OffRefrigerator USE Additional Features Fast Cool & Fast Ice Adjusting the ControlsCondition Temperature Adjustment Refrigerator ControlsChilled Door Bin ConvertibleDrawer Temperature ControlCrisper Humidity Control Water and Ice DispensersTo Dispense Water Standard To Dispense Water Measured FillIce Maker and Storage Bin To Dispense IceRefrigerator Care CleaningTo Clean Your Refrigerator Water Filtration SystemMotor seems to run too much TroubleshootingRefrigerator Operation Refrigerator is noisyTemperature and Moisture Temperature is too warmIceand Water Water dispenser will not operate properly AccessoriesStainless Steel Cleaner and Polish Recently dispensed large amount of water? Allow 24 hoursPerformance Data Sheets Application Guidelines/Water Supply ParametersBase Grille Water Filtration System This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Utilisation des commandes Achever l’installationUtilisation DU Réfrigérateur Condition Ajustement DE LA Température Commande de température dans Le tiroir convertible Compartiment fraîcheur dans la porteDistributeurs d’eauet de glaçons Le distributeur deau Distribution deau standardDistribution deau remplissage mesuré Unités Par défaut Minimum MaximumMachineà glaçons et bac dentreposage Distribution de glaceNettoyage Entretien DU RéfrigérateurSystème de filtrationde leau Nettoyage de votre réfrigérateurRemplacement des ampoules d’éclairage DépannageFonctionnement du réfrigérateur Température et humidité Glaçons et eauLes portes sont difficiles à ouvrir Accessoires Nettoyant et poli pour acier inoxydableCartouche du filtre de la base standard Feuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base Articles Exclus DE LA Garantie Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pas

W10162458A, W10162459A specifications

The Whirlpool W10162459A and W10162458A are essential accessories for enhancing kitchen operations, particularly in Whirlpool kitchen appliances. These models cater primarily to the need for improved filtration and performance, ensuring that appliances work efficiently while providing cleaner, healthier results.

One of the standout features of these models is their advanced filtration technology, which effectively removes unwanted contaminants from water. Users can expect a significant reduction in impurities, which contributes to improved taste and quality of water and ice produced by refrigerators. This technology is vital for consumers who are health-conscious and prefer fresh water free from chlorine and other undesirable chemicals.

The W10162459A and W10162458A models are designed for easy installation, ensuring that even those without technical expertise can replace their old filters with these new units. The process is straightforward due to the user-friendly design, which aligns perfectly with Whirlpool appliances, making maintenance a hassle-free experience. This characteristic emphasizes convenience, catering to busy individuals and families who rely on their kitchen appliances for daily functioning.

Durability is another key characteristic of these filters. Constructed with high-quality materials, they are built to last and maintain performance over extended periods. The replaced filters not only promise efficiency but also reduce the frequency of replacements, saving consumers both time and money in the long run.

In terms of compatibility, the W10162459A and W10162458A are designed to fit a range of Whirlpool refrigerator models. This versatility makes them a popular choice among consumers with different appliance models, ensuring that users are not limited by specific models or brands when looking for replacement filters.

Moreover, the filters meet or exceed industry standards for water filtration, instilling confidence in users about the safety and quality of their drinking water. The technology within these models assures users that they are making a smart choice for their health and well-being.

In summary, the Whirlpool W10162459A and W10162458A filters offer a combination of advanced filtration technology, easy installation, durability, compatibility, and adherence to safety standards. These features make them indispensable accessories for anyone looking to enhance their kitchen experience, ensuring that their appliances operate optimally while providing fresh, clean water.
Top Page Image Contents