Whirlpool 8ET20NK, 8ET18NK manual Leveling it

Page 7

Leveling it

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below.

1.Remove base grille. (See page 12.)

2.To raise front, turn screw clockwise.

3.To lower front, turn screw counterclockwise.

4.Check with level.

5.Replace base grille. (See page 12.)

Front roller

Right to raise; left to lower

Use a screwdriver

Image 7

Contents Fol+ UseAndCareGuidePage Center Number 800-253-1 301 Is toll-free Hours a Day Your safety is important to usThank you for buying a Whirlpool appliance Our ConsumerHelp us help you Imt3ortant Safetv InstructionsControl panel Parts And FeaturesPlugging it Before Using Your RefrigeratorCleaning it Installing it properlyLeveling it Exterior moisture control Using Your RefrigeratorSetting the controls Temperature controlsChanging the control SettingsRemoving the meat drawer and cover Adjusting the refrigerator shelvesRemoving the crispers Etisnk and Etisnm Using the ice cube traysRemoving the crisper CoverFactory-installed On ET1 8NM Optional On Etisnk Using the automatic iceMaker Removing the base grille Changing the light bulbsUnderstanding the sounds you may hear Reversing the door swingSaving energy Part Cleaning your refrigeratorHOW to Clean Caring For Your RefrigeratorShort vacations Vacation and movingCare Long vacationsGuide Power interruptions1Storing fresh food Storing frozen food Before calling for assistance If You Need Assistance Or ServiceProblem SolutionIf you need FSP@ replace- ment parts If you need serviceIf you are not satisfied with How the problem was Solved If you need assistanceFull FIVE-YEAR FSP Length of Warranty Whirlpool will PAY forWarranty Erator2170352